How to troubleshoot a burnt out turn signal bulb?
Troubleshooting for burnt out turn signal bulbs in your MKX is relatively easy – turn your hazard lights on and check the front of your MKX and then the back, whichever side is not illuminating is the side with the burnt out bulb.
Where is the turn signal light bulb located?
See the photo below, look upward behind the front bumper to the right where the headlight housing is and the photo shows where the turn signal light bulb is located.
How to change your turn signal bulbs and upgrade?
What you need to do then is to trick your vehicle’s ECU into thinking that your newer LED bulb has the same resistance and power consumption as the bulb you are replacing. When you upgrade to the LED bulbs, you just need to make sure you connect a load resistor across the wires feeding the turn signal light bulb.
What kind of light bulbs are used for turn signals?
Common bulb types for turn signals are 1156 and 1157 which are twist type bulbs, and 3157 or others which may be a pull out type of bulb. Twist the light bulb socket back into the headlight housing until it clicks and you are done.
Troubleshooting for burnt out turn signal bulbs in your MKX is relatively easy – turn your hazard lights on and check the front of your MKX and then the back, whichever side is not illuminating is the side with the burnt out bulb.
Which is the best turn signal light bulb?
The best turn signal light mini bulbs for cars and trucks let you clearly indicate which direction you plan to turn. The bulbs are essential for safe lane changes and turns. If your turn signal doesn’t flash when the blinker is on, chances are that the turn signal light mini bulb is out.
Where can I get a mini light bulb for my Turn signal?
There’s an AutoZone store with knowledgeable staff right in your area. We can help you find the right mini bulb to fit your vehicle’s turn signal housing. The turn signal mini light bulb isn’t a difficult repair. Simply pop the old bulb out of the compartment and replace it with a new one.
When to replace a turn signal light bulb?
Before you replace the bulb, check the bulb socket to make sure there is no damage or corrosion. After you replace the light bulb, if the turn signal still malfunctions, the problem may be a bad turn signal switch or a bad flasher unit. Sometimes the electrical wire connectors go out and need to be replaced.