How to solve P0011?
How Do I Fix Trouble Code P0011?
- Visually Inspect the System. Start with a visual inspection of the connector, wiring, and valve.
- Check Your Oil. Check the condition of the engine oil.
- Rescan the Codes. Scan your codes again and capture the freeze frame data.
What does code p0011 Infiniti DTC stand for?
A code P0011 Infiniti definition:the VVT (variable valve timing) or VCT (variable camshaft timing) components and the car’s PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 Infiniti DTC specifically definition:the camshaft (cam) timing.
What does Infiniti p0011 intake valve timing control?
That consists of a few different components but the P0011 Infiniti DTC specifically definition:the camshaft (cam) timing. In this case, if the cam timing is above a set limit (over-advanced), the engine light will be illluminated and the code will be set.
What is the cause of engine code p0011?
What Is The Cause Of Code P0011? 1 Engine oil is dirty 2 Engine oil is too low 3 Engine oil is incorrect viscosity 4 Camshaft variable valve timing control solenoid failure 5 Camshaft phaser is seized in the advanced position 6 Continuous oil flow to Variable Camshaft Timing chamber
What does trouble code p0011 mean on a car?
The camshaft (s) is (are) adjusted by the ECM through the use of an oil control valve (s) (OCV) also called variable valve timing control solenoid valves. When trouble code P0011 is set, it means that the intake camshaft in Bank 1 is more advanced than the ECM has told it to be.
Which is a camshaft on an Infiniti p0011?
The “A” camshaft is either the intake, left, or front camshaft. Most likely a P0011 Infiniti DTC will result in one of the following: hard starting, poor idle, and/or stalling. There are potentially other symptoms as well. Of course, when trouble codes are set, the MIL (malfunction indicator lamp, a.k.a. the check engine light) illuminates.
What do the p0012 and p0022 codes mean?
For the P0012 and P0022 codes to appear indicates that the OCV solenoid is mechanically closed at all times and not allowing engine oil to move the intake camshaft (s) when commanded (ground applied) by the PCM.
What does a p0010 code mean on an OCV?
When you consider what these codes are saying, it becomes obvious that these codes are more indicative of a mechanical failure or the results of poor maintenance. These four DTCs could be an electrically failed OCV but they would most likely be accompanied by a P0010 or P0020 code.