How to set the clock on a Honda Fit?
Learn how to toggle through the correct menu items to set the time correctly in your Honda. You will see whether your Honda needs to be turned on and how to navigate to the clock settings and accurately set the time in this free how-to video for a 2007 Honda Fit.
How do you replace a clock spring on a car?
Complete the job by putting the alignment markers in place and then the steering wheel is ready to be re-installed and you are all set. Reconnect the batteries negative cable and you may need to clear the airbag trouble codes once the job is completed. Watch the Video! Here is a clock spring getting replaced along with a turn signal switch.
Where is the clock spring on a Toyota?
The clock spring is located behind the steering wheel. Be cautious when working around the airbag as its an explosive. Disconnect the battery and let the system drain for 15 mins before removing the airbag. Also be sure to mark your steering wheel position before removing it from the splines.
How to change the rear blinker on a Honda Fit?
Change a rear blinker Don’t send mixed signals – if your turn signal doesn’t blink, or blinks rapidly, you likely have a burnt out bulb 2008 Honda Fit 1.5L 4 Cyl. Proper jumpstart procedure
Learn how to toggle through the correct menu items to set the time correctly in your Honda. You will see whether your Honda needs to be turned on and how to navigate to the clock settings and accurately set the time in this free how-to video for a 2007 Honda Fit.
Where can I buy a Honda Fit manual?
To purchase printed manuals, you can order online or contact: Delivery time is approximately five weeks. To save paper and time, you can download the latest manuals now. Recommended Service for Your 2008 Honda Fit Recommendations for regular servicing tasks for your vehicle can be found in Service & Maintenance .
What do I need to replace clock spring?
The clock spring has the wiring which controls the Horn, Cruise Control, and the Radio Controls on the steering wheel. There is one special tool needed to remove the air bag. The rest are general tools. I used a TX30 star bit screwdriver which seemed just slightly small but it did get the job done.
How to replace clock spring / cable reel on 2003-2007?
I’ll try to answer them in a timely manner. www.instagram.com/GarageBuiltHondas Help support my channel with GarageBuiltHondas decals! Grab some in the link below!