How to reset service reminder on Mercedes Benz SLK?
The video in this article will help you reset the service reminder on Mercedes-Benz SLK, chassis R170. This is also called the FSS Service reset and is performed after an oil change. Turn the ignition to ON position. That is position II, right before starting the engine. Within one second press the knob/button twice.
How to reset the oil service light SLK320?
Continue to hold the knob/button. After 10 seconds, a signal sounds and the display shows 7,000 mi or 11000km for 10 seconds. Release the knob/button. Turn the ignition off and then start the engine to verify the indicator has been reset.
What does the fault code on a Mercedes mean?
Mercedes Fault Code: P261F71 1 Check Engine Light 2 Little to no acceleration 3 Coolant leak 4 Brake Pedal Pressure 5 Engine overheating More …
How to reset the FSS system on a SLK R170?
To reset the FSS System on a SLK R170, after an oil change follow these steps: Turn the ignition to ON position. Within one second press the knob/button twice. The present status for days or distance is displayed. Press and hold the knob/button, while turning the distance is displayed once more. Move ignition to the run position again.
Where is the fault code on a Mercedes SLK?
Disconnecting the battery doesn’t erase the code. The scan tool’s cable (or a Bluetooth module on wireless systems) plugs into the OBD-II diagnostic port (yellow arrow). On the R170 SLK, the port is located on the under-dash panel, behind the hood-release lever (blue arrow).
Can you read the fault code on a Mercedes Benz?
Can read fault codes from multiple systems such as transmission, engine, ETS, airbag and more. Can clear fault codes. Can read and erase all fault codes on Mercedes-Benz cars. Only works on MB but can perform further troubleshooting including SBC brake systems, convertible systems, Air Conditioner (A/C) system. 3. Mercedes-Benz Star Diagnostic DAS
Where to find DTC code on Mercedes SLK 230?
The dreaded Check Engine light (arrow) stays illuminated when the car’s computer registers a diagnostic trouble code (DTC). Disconnecting the battery doesn’t erase the code. The scan tool’s cable (or a Bluetooth module on wireless systems) plugs into the OBD-II diagnostic port (yellow arrow).
Where is the USB port on the R170 SLK?
On the R170 SLK, the port is located on the under-dash panel, behind the hood-release lever (blue arrow). The port is protected by a plastic cover, which pivots away so that the cable can be plugged in.
How to reset service reminder on Mercedes AMG?
You’ll want to reset the maintenance service reminder after you completed the recommended service. That way, your system can accurately remind you of future service requirements. Start the ignition until the miles display on the dashboard. Turn key to position 1. Figure 1. The navigation buttons are located on your steering wheel.
Where is the service light indicator on a Mercedes?
Turn key in steering lock to position 2. To call up the trip odometer and main odometer, press either of lower two buttons on left hand side of steering wheel (system select looks like file folder) until the display appears. Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears.
The video in this article will help you reset the service reminder on Mercedes-Benz SLK, chassis R170. This is also called the FSS Service reset and is performed after an oil change. Turn the ignition to ON position. That is position II, right before starting the engine. Within one second press the knob/button twice.
Continue to hold the knob/button. After 10 seconds, a signal sounds and the display shows 7,000 mi or 11000km for 10 seconds. Release the knob/button. Turn the ignition off and then start the engine to verify the indicator has been reset.
Turn key in steering lock to position 2. To call up the trip odometer and main odometer, press either of lower two buttons on left hand side of steering wheel (system select looks like file folder) until the display appears. Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears.
To reset the FSS System on a SLK R170, after an oil change follow these steps: Turn the ignition to ON position. Within one second press the knob/button twice. The present status for days or distance is displayed. Press and hold the knob/button, while turning the distance is displayed once more. Move ignition to the run position again.