How to reset handbrake jaguar s type?

How to reset handbrake jaguar s type?

RE: EPB Reset

  1. Reset the EPB module: a.
  2. Start the engine.
  3. Firmly apply and release the footbrake five times.
  4. Confirm that the message ‘NOT CALIBRATED’ or ‘APPLY FOOT AND PARK.
  5. Lightly press the footbrake pedal.
  6. Apply the parking brake by using the EPB switch.
  7. Release the parking brake.
  8. Release the footbrake.

Where to find electric parking brake on Jaguar?

See ELECTRIC PARKING BRAKE (EPB) (RED). The warning lamp in the Instrument panel will remain on for a short time, if the EPB is applied when the ignition system is reverted to Convenience mode. If a fault in the system is detected, Park Brake Fault or Cannot Apply Park Brake will be displayed in the Message centre.

Why does the parking brake not disengage on a 2005 Jaguar?

Re: parking brake will not disengage on 2005 jaguar s… Although a temporary workaround, disconnecting the battery and/or control module to release the park does not resolve why it became locked-on in the first place. The problem with many many S-types has been a failure of the park brake motor.

What happens when the EPB is applied on a Jaguar?

The warning lamp in the Instrument panel will remain on for a short time, if the EPB is applied when the ignition system is reverted to Convenience mode. If a fault in the system is detected, Park Brake Fault or Cannot Apply Park Brake will be displayed in the Message centre. Seek qualified assistance as soon as possible.

What to do if you cant apply park brake?

If a fault in the system is detected, Park Brake Fault or Cannot Apply Park Brake will be displayed in the Message centre. Seek qualified assistance as soon as possible.

Re: parking brake will not disengage on 2005 jaguar s… Although a temporary workaround, disconnecting the battery and/or control module to release the park does not resolve why it became locked-on in the first place. The problem with many many S-types has been a failure of the park brake motor.

How to calibrate a jagrepair EPB motor?

To do this, set the system into ‘Calibration Mode’ by doing a battery reset. Then, with ignition ‘ON’ and the vehicle brakes at room temperature, lightly press the brake pedal and apply the parking brake. Date of issue 12/05 Bulletin Number XJ206-07 Page 3 of 10 DTC C1784 – EPB MOTOR OUTPUT SHORT TO GROUND.

What do you mean by parking brake fault?

Do you mean ‘parking brake fault’ This message can sometimes appear with low battery causing the electronic park brake to lose its calibration.

Is there parking brake warning that brake cannot be?

Re: S type jaguar parking brake warning that brake cannot… “The vehicle was imobolised by a computer failure on 18th January 2010. On reporting my problem to your company, as the car was supplied by you and having done under 10,000 miles is under warranty, I was refered to the AA.