How to remove the rear quarter trim panel?
Rear quarter trim panel Removal 1 Unbolt the seat belt from its floor mounting. 2 Pass the belt buckle slide through the panel aperture. 3 Pull the seat cushion and backrest forward. 4 Extract the single screw from the quarter panel and then using a suitable forked tool, lever out the clips and remove the panel (see illustration).
How to remove and refit interior trim panels?
12 Peel back the edges of the trim panel and remove it. 13 Refitting is a reversal of removal, but refit the windscreen as described in Section 20. 14 Remove the two seat belt anchorages from the pillar. 15 Pull off the weatherstrips from the door apertures. 16 Remove the upper trim panel from the pillar.
How to remove a pillar from a car?
14 Remove the two seat belt anchorages from the pillar. 15 Pull off the weatherstrips from the door apertures. 16 Remove the upper trim panel from the pillar. 17 On three-door models, the rear quarter window will first have to be removed before the pillar trim panel can be withdrawn.
How to remove the trim from a car?
19 Refitting is a reversal of removal, but tighten the seat belt anchor bolts to the specified torque. 20 Remove the rear seat belt upper anchorage. 21 Fold down the rear seat back. 22 Extract the five securing screws and remove the trim panel (see illustration).
When to replace a Honda Pilot body part?
If you’ve noticed that the exterior of your vehicle does not have that factory look any longer, body parts are dented and rusty, and the windshield has multiple chips and scratches, it is a good idea to refresh the vehicle’s exterior by replacing worn-out and damaged components.
Where can I buy genuine Honda Pilot Parts?
The best place to buy Pilot OEM parts for years has been Honda Parts Now, as we carry a full selection of genuine Pilot parts. We’re the best online Honda parts store. All of our guaranteed genuine parts for Pilot and accessories are expedited directly from Honda dealers and backed by the manufacturer’s warranty.
How to remove interior panels from your car?
Removing interior panels in your vehicle is easy when you use a fine touch and proper tools. Learn small tricks to removing any panel in your car or truck. EDM Detection Mode by Kevin MacLeod is licensed under a Creative Commons Attribution license ( https://creativecommons.org/licenses/…) Source: http://incompetech.com/music/royalty-…
How many seats does the Honda Pilot have?
The Pilot features three rows of seats and shares its platform with the Odyssey. The unibody construction of the Honda Pilot, as well as its independent suspension makes this model very easy to handle.
How do you remove the rear trim on a Land Rover?
6.Remove the rear quarter trim panel. Removethe Torx screw. Liftthe storage box lid and using a firm grip,release the window clips by pulling the trim inboard.
How do you remove a rear trim panel?
Remove the 3 quarter trim panel retaining screws (1). Starting at the lower edge of the trim panel and moving alternately clockwise and counterclockwise, pull outward on the trim panel to disengage the eight rear quarter trim panel attaching clips (2). Remove the quarter trim panel from the vehicle.
12 Peel back the edges of the trim panel and remove it. 13 Refitting is a reversal of removal, but refit the windscreen as described in Section 20. 14 Remove the two seat belt anchorages from the pillar. 15 Pull off the weatherstrips from the door apertures. 16 Remove the upper trim panel from the pillar.
How to remove interior panels from a car?
Look behind the window crank and slide the pick under the edge of the metal clip that holds the crank in place. Remove the clip and pull the crank off. Step6 Remove the door handle by unscrewing the small screw located in the center. Gently pull the door handle out until you see the back of the handle and unclip the rod from the door handle.
6.Remove the rear quarter trim panel. Removethe Torx screw. Liftthe storage box lid and using a firm grip,release the window clips by pulling the trim inboard.