How to remove the instrument cluster on a Mercedes W123?
On a diesel W123 this will include the glow plug bulb and seatbelt bulb. Then unplug the spade connector for the power supply to the clock. Next, unplug the two small plugs near the middle of the cluster. Next, use a 10mm wrench to unscrew the oil line from the oil gauge.
Where are the plugs on a BMW door?
1. Plug for rear section to driver’s door (5-pin) 2. Plug for rear section to center section (27 –pin) 3. Plug for window control and central lock wire to driver’s door(13- pin) 4. Plug for window control and central lock wire to special equipment plug 5. Window switch rear left 6.
Do you need to rewiring the C101 plug on a M50?
If you have changed your engine, especially for a non-E30 engine such as a M50, then rewiring the C101 plug is essential for making the dash cluster work properly. To control a number of the instruments, batteries are fitted to the back of the circuit board.
Where are the plugs on an E30 engine?
These plugs are fed information from the main loom through the C101 plug, which is attached to the bulkhead inside the engine bay. If you have changed your engine, especially for a non-E30 engine such as a M50, then rewiring the C101 plug is essential for making the dash cluster work properly.
On a diesel W123 this will include the glow plug bulb and seatbelt bulb. Then unplug the spade connector for the power supply to the clock. Next, unplug the two small plugs near the middle of the cluster. Next, use a 10mm wrench to unscrew the oil line from the oil gauge.
What do you need to know about Mercedes wiring diagrams?
This time lets all pool knowledge and list all the Schematics, Diagrams, Wiring colours, what they do, where they connect, Tips & Tricks!
Where is the microswitch on a Mercedes Benz?
There is a little ‘Microswitch’ which is located in the top left hand corner (see pics). This is switched by the positioning of the cam which obviously turns dependant on where the ‘Lever’ is positioned from ‘P’ down to ‘1’.