How to remove rear shock DR650?
LostInPA
- Remove plastics and seat.
- Put bike up on stand.
- Remove stock muffler.
- Remove bolt from dog bone on linkage.
- Remove lower shock bolt.
- Remove upper shock bolt – careful now it’s loose and can drop down.
- Carefully move it down out the bottom.
Does DR650 have cush drive?
Cush Drive Rubber Dampers The DR650 is rather hard on the cush drive rubbers. Replace these any time you feel excessive play in the sprocket carrier hub.
What is the purpose of a cush drive?
A cush drive is a feature in a motorcycle or scooter drive-train that is designed to reduce stress on drivetrain components during gear or throttle changes.
How fast will a DR650 go?
Top Speed: 120 mph (Est.)
How fast is a Suzuki dr650?
120 mph (Est.)
How big are the front sprockets on a Suzuki DR650?
A 44t rear sprocket and stock 110 link chain length will allow 14-15t front sprockets to be used. A 46t rear sprocket and 112 link chain will allow 14-15-16t front sprockets to be used. A 46t rear is as big as you can go without replacing the rear chain guide. Front sprockets to use are from pre ’96 DR600/650 or any year DR750/800.
How to remove front fork from Suzuki DR650?
Slightly loosen the front fork cap bolt after loosening the front fork upper clamp bolt to facilitate later disassembly. Remove the front fork by loosening the lower clamp bolts. Remove the front fork cap bolt, spacer, washer and spring. Invert the fork and stroke it several times to drain fork oil.
Where can I get a Suzuki DR650SE service manual?
If you ever have any questions on how to use the manual, or performing the procedures on your Suzuki DR650SE, Cyclepedia.com provides expert tech support to assist you. When you subscribe to this online motorcycle manual you’ll get instant access to the following information:
Where to remove front brake caliper on Suzuki 96-dr650?
Align the top surface of the inner tube to the top surface of the steering stem upper bracket. From the Suzuki 96- DR650 maintenance manual: Remove the front wheel. Remove the front brake caliper.
How much does a Suzuki DR 650 Pro suspension cost?
You can simply rebuild the 43mm conventional forks with heavier springs, fresh fluid, seals and bushings to be a simple as it gets, rebuild the shock with fresh fluid, nitrogen, bumper or bladder, even a mild revalve for about $595.00 to $748.00 or so depending on rider weight and conditions.
Is the Suzuki DR650 a dual sport Mount?
Simple, light and rugged, the DR650 is popular around the world as a true dual sport mount. Since 2001, there has been at least one in the Cogent garage at all times.
What kind of Screws do you use on a Suzuki DR650?
Some chose to replace with NSU screws with 5mm x 20mm hex head bolts (to engage a few more threads) and 5mm serrated lock washers. Note: Starting in year model 2017 Suzuki has started using threadlocker on these screws!
What’s the difference between Suzuki DR650 and Mojave?
The Mojave product is a drop-in replacement for the DR650 stock shock, no modifications necessary. Mojave is not simply an improved Suzuki shock, it is a brand new replacement shock that is a totally engineered suspension solution to suit your needs. Why Mojave?