How to remove a front wheel on a Harley Davidson?

Front wheel and rear wheel removal, installation, repair, service for all 1985-2009 Harley Davidson H-D Sportster, Softail, Dyan & Touring motorcycle models. Harley Davidson Front Wheel are Rear Wheel Removal and Installation Procedures 1 HARLEY DAVIDSON – Sportster Manuals – Touring Manuals – Dyna Manuals – Softail Manuals

How do you replace a front tire on a Harley?

Bob and Mark show you how to remove and replace the Harley front wheel on your Sportster. They teach you the proper way to take off the brake caliper and wheel axle so you can do whatever you need to do to the front tire. Once the wheel is off you can replace the tire, retrue the spokes or check the rotor.

How do you close the modal on a Harley Davidson?

This modal can be closed by pressing the Escape key or activating the close button. This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. This is a modal window. Sign up for premium membership and get access to our best Harley repair videos and step-by-step instructional projects.

How often should you change wheel bearings on a Harley?

Turn each bearing with your fingers. If the bearings feel rough, or are questionable, they need to be replaced. Wheel bearing inspection should be performed every time a wheel is removed and at every major service. Wheel bearings may last tens of thousands of miles.

How do you remove the front wheel on a Harley Davidson?

Figure 2. Raise your Harley. Before removing the front wheel, you will need to remove the brake caliper to create some room. Use your socket to remove the two bolts holding the brake caliper to the left front fork. Then pull the brake caliper up and off the rotor. Be sure to put it somewhere safe where it doesn’t hang from its brake line.

How do you remove a Softail tire on a Harley Davidson?

Use your rubber mallet to tap the axle from the left side of the wheel, pushing it to the right. As you’re tapping it, push the wheel up and towards the bike to help the axle come off. As soon as the axle comes off, the wheel will be free. Figure 4. The axle nut is in the center of the rotor. Figure 5. Loosen axle bolt.

Can you take a tire off a Harley Davidson?

A helping friend could come in handy, because you may have to do some wiggling to get the tire off, and that could cause the bike to tip over. If you want to remove your front tire, then read on to learn how to accomplish this. Figure 1. Harley-Davidson front tire. Using the proper motorcycle jack, raise your Softail carefully.

How do you install a rear wheel on a car?

As you guessed, installing the rear wheel is the same as removal only in the reverse order! You just place the wheel back in the frame being careful to get the chain on the right cog, close the quick release to lock the wheel in, and close the brake so your brakes are working again.

What’s the best way to change a wheel?

Ensure your vehicle is not on a main road, but in a safe, flat level location. Apply the handbrake and put your hazards on. Put on a reflective jacket and put out your emergency warning triangle.

Do you need to touch disc brakes to remove rear wheels?

Note: If you’re fixing a flat tire, you needn’t worry about this step because when the air is all out of the tire it will fit through the brake easily. Also, if your bike has disc brakes, you too can skip this step because you don’t need to touch disc brakes to remove wheels.

What’s the best way to remove rear wheels?

1. Shift onto the small cog and small chainring. Shifting the chain down onto the smallest cog on the rear wheel and the smallest chainring on the crankset, creates slack in the chain, which makes rear wheel removal much easier.

How do you change rear wheels on bike?

If you’re riding and feel the rear tire becoming soft slowly from a puncture, you may have time to make the shifts to the smallest cog and ring as you’re slowing to a stop. If you’re not riding, or have already stopped, operate the right shift lever, lift the bike by the seat and pedal by hand and the chain will move down the cogs in the back.

How much does it cost to replace a rear wheel on a Harley?

Then you can take the wheel to a local shop to have your new tire mounted and balanced. Many shops will do this for under $50. Once that is done just perform the operation in reverse to re-install the rear wheel. The only difficult part is going to be adjusting the drive belt tension.

What kind of tool do I need to remove rear wheel?

Other tools include a large socket, breaker bar for the axle cone nut, a crescent wrench, or more preferably a large box-end wrench, and silver anti-seize lubricant.

What causes rear fork deflection on a Harley Davidson?

The cleve blocks are the cause of “Rear Steer” or “Rear Fork Deflection”. Harley came up with a patch in 2002, using bearings. Because the pre 2002 transmissions have a 5/8” mounting hole for the 5/8” swing arm pivot shaft, a conversion unit has been made. No transmission removal for boring is necessary.

Do you need to drop the primary isolator on a FXD?

If you are only changing the swingarm isolaters no need to drop the primary. thanks kemo,maybe i used the wrong terminology,lets try rubber motor mount,i`ve heard it called both Click to expand… I’ve only changed the front one on a FXD but I’m familar with the rear. The biggest problem is going to be just getting at it.

How do you replace a rear fork on a motorcycle?

• Put the belt back on(make sure you do not forget this as you will be pissed & have to start all over) and put the new rear fork back into the bike. Replace the pivot shaft (Anti Seize) thru the rear fork and transmission.

Do you need a wide front wheel on a Harley Davidson?

Wide motorcycle wheels make your Harley-Davidson touring model look tougher, yes, but there are other reasons why you may be considering upgrading your front wheel. Large wheels are better able to absorb disturbances on the road’s surface, thereby giving you a smoother ride.

What kind of wheels does a Harley Davidson Road King have?

– 2003 Harley-Davidson FLHRCI Road King Classic. The Road King® Classic draws its styling cues from storied Harley-Davidson® motorcycles of the past. With wire-laced wheels, fat whitewall tires, and gorgeous leather-wrapped hard saddlebags that retain their shape mile after mile, this motorcycle turns heads.

How big is the front tire on a Harley Davidson?

Regardless of your reasons for doing it, you may wonder what is the largest front wheel you can install on a Harley Davidson touring model without changing out the fender? A 21” (diameter) x 3.25” (width) front tire will fit on a Harley without requiring you to change out the fender.

Navigation