How to fix the security light on a Pontiac Grand Am?
There is a way to bypass this problem by going under the dash behind the glove box at the control box. There is a set of three plug ins on this. The center plug will have a group of wires, the two wires you will need is the center black wire and the yellow wire next to it. you will need to splice back the black wire,and cut the yellow wire.
Why does my Pontiac Grand Am Not Start?
Have a Pontiac 2003 Grand Am. It may be caused by jumping other cars off your battery, the passlock prevents it to start. However,if you turn the key to the on postion wait til the security stops fleshing, then turn to off then to start it should fire up to reset your system.
Why is the security light on on my Grand Prix?
You cannot just turn it off unless the problem is fixed. The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back. Most likely, you need a new ignition cylinder. Those are what usually go bad on the Grand Prix cars.
What do I need to replace my 2002 Grand Am?
It is a 2002 grand am and so far I have had to replace the Catillic (not sure on the spelling) converter, master cylinder, fuel pump, gastic manifold, rack and pinon (spelling), hazard light switch (which still is clicking), and power steering pump. Also I need a new raditor.
How do you replace a Pontiac Grand Am security light?
Remove the cylinder from the ignition switch and replace with a new cylinder and Passlock housing….after replacement you will need to do a theft re-learn. To know exactly, you’d need a proper scanner to access the body control module and check for theft system codes.
You cannot just turn it off unless the problem is fixed. The security light is on because you have a problem with your Passlock theft system. There are temporary fixes, like doing a re-learn of the theft deterrent, but the problem will come back. Most likely, you need a new ignition cylinder. Those are what usually go bad on the Grand Prix cars.
What to do if your Grand Am won’t start?
When your Grand Am turns over but won’t start it maybe your anti-theft security system. When the security light blinks, the car won’t start. You must do a simple reset. The procedure in this video is what worked for us. Use of the free information in this video is at your own risk.
How much oil do you put in a Pontiac Grand Am?
The amount of oil you want to put in the engine is 4.8 liters or 5 quarts. That is straight from General Motors. Thank you very much. Not a problem, thank you and have a good night!
When your Grand Am turns over but won’t start it maybe your anti-theft security system. When the security light blinks, the car won’t start. You must do a simple reset. The procedure in this video is what worked for us. Use of the free information in this video is at your own risk.
What causes a Pontiac Grand Am to lock out of startup?
This is caused by a bad ingnition switch in most cases however if you have a cut key (non factory ingnition key) sometimes it will register it as a bad key..remove the key and try again…however I do believe you only get 3 tries otherwise the car is locked out of startup for 30min to 1hr. 60 people found this helpful.
What to do when your security light stops flashing?
Turn the key to the on position for 10 minutes then turn off, repeat 2 more times. the system should reset. Mine usually resets on the second time, if the security light stops flashing then i try to start. My mechanic told me it takes three times to reset but it never has on my car, good luck. 94 people found this helpful.
Why are my Pontiac Grand Am security lights not turning off?
The theft deterrent is disabling the starting of the vehicle because you have a problem with it. Your vehicle has what’s called ‘Passlock’. There is a sensor inside the ignition cylinder that has an electronic password. And i had read that if it is the ignition then the lights would not turn off.
How long does it take for security light to turn off?
Insert ignition key and turn to the “ON” position. Do not attempt to start the engine. Leave the key in the “ON” position for approximately 11 minutes. The security light will be steady on or flashing for the 11-minute period. Do not proceed to Step 2 until the security light turns off or stops