How to fix faulty Speedo and odometer?
Click to expand… Well if you can’t find the sensor there is another place you could pick up the signal from if you find this method easyer. If you can remove the stereo (as long as you have the radio code ) and then remove the cage (there is a torx screw at the back holding the cage in) there will be 2 connectors.
Why is the speedometer on my BMW not working?
– If the BMW speedometer LCD display has really pixel problems, then typically lines or colunms of the display are missing. Several cases the characters are broken, numbers and letters shown on the speedometer display are unreadable – tha backlight is even.
Is there Silver Ribbon cable for BMW speedometer?
LCD display with SILVER ribbon cable for BMW speedometer – E38 E39 M5 X5. IMPORTANT: needle removal tool is NOT included!You can buy it separately!
Why is my odometer and message center not working?
If both the odometer and message center are not working, the problem is likely to be a fuse (both of these displays share the same fuse.)
How do you repair an odometer on a car?
Lining up the pins of the stepper motors with their corresponding sockets on the PCB, push the board back onto the instrument cluster. Put pressure on the back of where the stepper motors are (see photo). Replace the back plastic cover of the instrument cluster, ensuring all clips are secured.
What to do if your speedometer is not working?
Unscrew the 4 small hex screws holding it in. Lift it out and unplug it. The hardest part is unplugging it as the connector can be very stubborn. You should Youtube ‘replacing gm instrument panel’.
Where is the odometer located on a PRND321?
Carefully pry the board away from the instrument cluster – it is held in place only by the pins of the stepper motors (labelled on the image)… but BEWARE, there is another small wire harness on the right and side of the board. The last thing is to gain access to the back of the LCD panel.