How to change the belt on a power steering pump?
How to Change a Power Steering Belt Step 1 – Get the Right Belt Step 2 – Unbolt the Steering Pump Step 3 – Remove the Old Power Steering Belt Step 4 – Replace the Old Power Steering Belt Step 5 – Replace the Bolts Step 6 – Apply Belt Dressing Step 7 – Check the New Power Steering Belt Topics:
Where is the power steering drive belt located?
The belt that drives a power-steering hydraulic-fluid pump is usually at the front of the engine , turned by a pulley on the crankshaft . It is generally separate from the belt that drives the water pump and alternator , but it may drive other components as well as the power-steering pump .
How do you test a power steering belt?
Grab the belt with your hands and spin the belt forward to test its operation. The belt should spin freely on the crankshaft, tensioner, and power steering pump pulley without trouble.
How do you replace a power steering press?
The press has two pieces — (a) a through bolt, and (b) a hub press. 1) Screw the hub press completely on the through bolt. 2) Grease the pulley and the pump hub. 3) Place pulley on pump hub. 4) Attach through bolt into hub. NOTE: Be absolutely certain to tighten the through bolt completely in the hub.
What’s the best way to replace a power steering belt?
In step 8 we used a pry bar to press the power steering pump forward to loosen tension. In this step, reverse that process by pressing the pump backward to tighten tension on the pulley.
What to do if your power steering belt is too slack?
If the belt was too slack, increase the tension by levering the pump outwards with a strong screwdriver or flat bar. Lever against the cast front end of the pump body, just behind the drive-belt pulley — not against any other part of the body or pipework, which are easily damaged.
Where is the power steering pump located on a 6 cylinder engine?
On most inline engines, the power steering pump will be located on the driver or passenger side of the engine compartment. V-style engines (6 and 8 cylinders) will typically have the power steering pump located in front of the motor.
Where is the power steering pulley located on a car?
Lever against the cast front end of the pump body, just behind the drive-belt pulley — not against any other part of the body or pipework, which are easily damaged. Rest the other end of the lever against a sturdy part of the pump mounting bracket on the engine.