How to change manual transmission on Jeep JK Wrangler?
Hold an oil catch pan up close to the exhaust crossover on your Jeep JK Wrangler and then remove the drain bolt completely. 4. The drain bolt on your NSG 370 manual transmission has a tip that is magnetized and as you can see in this pic, it should be covered with small metal filings that stand up like hair.
What is the repair manual for a 2007 Jeep Wrangler?
2007 Jeep Wrangler JK / Jeep Liberty KJ / Jeep Compass MK / Jeep Grand Cherokee WK / Jeep Commander XK SERVICE & REPAIR MANUAL – DOWNLOAD! Download Now
What kind of key do I need to program my Jeep?
B. There are a few transponder keys (Y160-PT, Y164-PT, FOBIK, Push to start remotes etc) that work on Jeep models. You must have the right type of transponder key that matches your model and year. Otherwise, the key will not program.
Where is the oil catch pan on a Jeep JK Wrangler?
Park your Jeep JK Wrangler on level ground. Place an oil catch pan underneath your NSG 370 manual transmission and then, using an H14 allen bit, remove the fill bolt which is located on the passenger side as shown. 2.
Hold an oil catch pan up close to the exhaust crossover on your Jeep JK Wrangler and then remove the drain bolt completely. 4. The drain bolt on your NSG 370 manual transmission has a tip that is magnetized and as you can see in this pic, it should be covered with small metal filings that stand up like hair.
Can a JK Wrangler handle all types of terrain?
Understand that your JK Wrangler is made to handle all types of terrain, but you do have to do your part in maintaining its fluid levels, and preventing issues beforehand is much less expensive than corrective measures later. The following charts list the fluid capacities and types for your JK Wrangler.
Park your Jeep JK Wrangler on level ground. Place an oil catch pan underneath your NSG 370 manual transmission and then, using an H14 allen bit, remove the fill bolt which is located on the passenger side as shown. 2.
Where is the drain plug on a Jeep JK Wrangler?
NOTE: You can also create a drain plug removal tool by cutting the end off of a 17mm allen wrench or H17 bit. 1. Park your Jeep JK Wrangler on level ground. Place an oil catch pan underneath your NSG 370 manual transmission and then, using an H14 allen bit, remove the fill bolt which is located on the passenger side as shown. 2.
How many gears does a Jeep Wrangler have?
These transmissions feature four forward gears including one overdrive gear. With an aluminum housing, the NV1550 was a short-lived 5-speed manual transmission for Jeep Wranglers. This is a light duty trans fitted with 5 forward gears including 1 overdrive gear.
Where is the steering gear box on a Jeep Wrangler?
Use the fitment form at the top of the page to select your exact year and engine type for your Jeep Wrangler. The steering gear box is the heart of the vehicle’s steering system.
Which is better manual transmission or automatic in Jeep Wranglers?
A bit of advice from other Jeepers: just because you prefer one transmission over the other doesn’t mean you shouldn’t become proficient with both. Manual transmission Jeeps are on the decline these days, but imagine if a friend of yours in his manual TJ hurts himself to the point of being unable to drive.
These transmissions feature four forward gears including one overdrive gear. With an aluminum housing, the NV1550 was a short-lived 5-speed manual transmission for Jeep Wranglers. This is a light duty trans fitted with 5 forward gears including 1 overdrive gear.
Use the fitment form at the top of the page to select your exact year and engine type for your Jeep Wrangler. The steering gear box is the heart of the vehicle’s steering system.
When to use ATF + 4 in Jeep Wrangler?
ATF+4 was developed to succeed ATF+3 applications and degrade much slower. Where a transmission with ATF+3 might experience some shudder at around the 30k mile mark, the same trans with ATF+4 shouldn’t experience shudder until 80-100k miles (depending on driving conditions). In short, ATF+4 is a complete replacement for ATF+3.
Can you use GL-3 fluid in a Jeep Wrangler?
If it’s a GL-4 bottle without the GL-3 rating, don’t use it in a transmission calling for GL-3. ATF+4 and ATF+3, on the other hand, are significantly simpler. ATF+4 was developed to succeed ATF+3 applications and degrade much slower.