How much transmission fluid does a Yamaha Blaster take?
hey the blaster holds 650ml or 700ml if the engine has jjst been torn down it says how much it holds right behind the fill plug pretty much hope this helps:) I put 24 oz. in my sons Blaster after a change and it’s right in the middle/top of the “sight glass”.
How much oil does a 2002 Yamaha Blaster take?
Yamaha Blaster
| Manufacturer | Yamaha |
|---|---|
| Seat height | 29.13” (74 cm) |
| Weight | 306 lb (dry) 324 (wet) |
| Fuel capacity | 2.7 gallon |
| Oil capacity | 650ml |
What is the fuel mixture for Yamaha Blaster?
8oz of yamalube for every two gallons of gas.
What spark plug does a Yamaha Blaster 200 take?
NGK Resistor Sparkplug BR8ES
NGK Resistor Sparkplug BR8ES for Yamaha BLASTER 200 2001-2006.
What kind of gear oil does a Yamaha Blaster take?
ATF or gear oil or ideally a specialty motorcyle oil designed for 2-stroke gearboxes like Motul Transoil 10w30. For wet clutches thinner is better, and synthetic has some issues. Do NOT use 10w30 motor oil, especially if it says: “Energy Saving”.
What is the model number on a Yamaha Blaster?
1. Vehicle identification number 1. Model label NOTE: The vehicle identification number is used to identify your machine. EBU00039 EBU00043 Indicator lights CONTROL FUNCTIONS EBU00756 Oil level warning light “OIL” Indicates a potential hazard that could result This light comes on when the oil level is low. in serious injury or death.
How to stop a Yamaha Blaster yfs200p engine?
EBU00053 EBU00736 Handlebar switches Light switch “LIGHTS” Turn the switch to the “LO” position to switch on EBU00054 Engine stop switch “ENG. STOP” the low beam and the taillight.
How to start a cold engine Yamaha Blaster?
EBU00094 EBU00567 Starter (choke) Seat Starting a cold engine requires a richer air-fuel To remove the seat, pull the seat lock lever mixture. A separate starter circuit supplies this upward and pull up the seat at the rear. mixture.