How much oil does a ZX6R need?
Put a little less than the specified amount (3.6 litres) of oil into the bike, until the level in the sight glass is in the middle. Then run the engine for a half a minute. The oil pump will fill the oil filter and some other nooks & crannies, and the level in the glass will drop.
How much torque does an oil pan have?
Engine oil pan bolts range in torque from seven foot-pounds to 22 ft-lb or more for large engines with heavier pans and bolts. Once you’ve torqued the bolts and filled the engine with oil, you should run the engine for five minutes to bring it up to normal operating temperature.
What are the torque settings on a Kawasaki?
These specifications are as accurate as the Kawasaki maintenance manual they came from. Please use judgement if anything seems way out of line and note the number of left hand threaded fasteners. Basic Torque For General Fasteners
How much torque does a Kawasaki Vulcan have?
These specifications are as accurate as the Kawasaki maintenance manual they came from. Please use judgement if anything seems way out of line and note the number of left hand threaded fasteners. Basic Torque For General Fasteners Threads Dia (mm) Torque (ft-lb) 5 30 ~ 43 in lb 6 52 ~ 69 in lb 8 10.0 ~ 13.5 10
How to tighten torque on Kaw ZX6R fasteners?
The following tables list the tightening torque for the major fasteners requiring use of a non-permanent locking agent or silicone sealant etc. Tighten the two clamp bolts alternately two times to insure even tightening torque Apply a non-permanent locking agent to the threads Apply molybdenum disulfide grease oil solution
These specifications are as accurate as the Kawasaki maintenance manual they came from. Please use judgement if anything seems way out of line and note the number of left hand threaded fasteners. Basic Torque For General Fasteners
These specifications are as accurate as the Kawasaki maintenance manual they came from. Please use judgement if anything seems way out of line and note the number of left hand threaded fasteners. Basic Torque For General Fasteners Threads Dia (mm) Torque (ft-lb) 5 30 ~ 43 in lb 6 52 ~ 69 in lb 8 10.0 ~ 13.5 10
The following tables list the tightening torque for the major fasteners requiring use of a non-permanent locking agent or silicone sealant etc. Tighten the two clamp bolts alternately two times to insure even tightening torque Apply a non-permanent locking agent to the threads Apply molybdenum disulfide grease oil solution
What are the torque settings on a Vulcan air cleaner?
Right Air Cleaner Cover Allen Bolt 12 Right Air Cleaner Allen Bolts 95 in lb Throttle Body Choke Cable Plate Screw 26 in lb L, Throttle Body Inlet Air Temperature Sensor Nut 69 in lb Water Temperature Sensor 13 SS