How much oil does a Pontiac 389 take?
| Engine lubricant oil capacity: | 5.7 liter / 6 U.S. qt / 5 imp. qt |
|---|---|
| with filter change | |
| Engine coolant capacity: | 18.9 liter / 20 U.S. qt / 16.6 imp. qt |
| Fuel tank capacity: | 100 liter / 26.4 U.S. gal / 22 imp. gal |
| Battery capacity (Ah): | 61 |
How much oil does a Pontiac?
How much oil does a Pontiac G6 2.4 take? Capacities: With filter 5 quarts After refill check oil level.
How many quarts does my engine take?
A 4-cylinder engine usually requires around 5 quarts of oil. A 6-cylinder engine uses roughly 6 quarts. An 8-cylinder engine uses anywhere between 5 to 8 quarts, depending on the size of the engine.
How much oil does a 2004 Pontiac GTO take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 6.6 quarts (with filter)After refill check oil level. |
| Torque: | 18 ft/lbs (Oil Drain Plug) |
What oil goes in Pontiac G6?
Castrol Edge Synthetic Motor Oil 5W-30 1 Quart.
How much oil does an ls2 hold?
The oil capacity of these engines is approximately 6 quarts (5.7 Liters). If you have serviced the engine with 15W40, we recommend that on the next oil change it be switched back to the correct oil.
When did the Pontiac 389 V8 come out?
The Pontiac 389 V8 was first introduced in 1959 and would become one of the most popular engines of the muscle car era. The engine evolved from the Pontiac 370 in which the stroke was increased.
What kind of oil pressure does a Pontiac V-8 use?
That’s because the bearing clearances in most modern Pontiac builds are a bit looser than what Pontiac originally specified for production engines. Generally speaking, 15W-50 and 20W-50 provide sufficient oil pressure and protection.
What kind of oil pump does a Pontiac have?
The Pontiac oil pump is relatively simple. Its cast body houses two spur gears that draw in, pressurize, and disperse oil throughout the engine. A ball-type pressure-relief valve regulates oil pressure to 40-, 60-, or 80-psi depending on the unit and engine build conditions.
What kind of engine does a Pontiac 389 GTO have?
389 Cylinder Heads and Valvetrain Correct cylinder heads for the 1965 389 GTO are cast #77 and have 1.96″ intake/1.66″ exhaust valves. For 1966, most GTO models had a cast #093 head. California-bound GTO’s in 1966 had different cylinder heads with an internal air galley. In 1967, the 389 Pontiac engine was enlarged to 400 cubic-inches.
That’s because the bearing clearances in most modern Pontiac builds are a bit looser than what Pontiac originally specified for production engines. Generally speaking, 15W-50 and 20W-50 provide sufficient oil pressure and protection.
The Pontiac oil pump is relatively simple. Its cast body houses two spur gears that draw in, pressurize, and disperse oil throughout the engine. A ball-type pressure-relief valve regulates oil pressure to 40-, 60-, or 80-psi depending on the unit and engine build conditions.
Which is the best race oil for a Pontiac?
Many professional engine builders consider Penn Grade race oil from Brad Penn among the very best available today for highperformance use. It’s a partial synthetic that contains high levels of desirable additives and offers excellent protection at all performance levels. It’s ideal if your Pontiac is equipped with a fl at-tappet cam.
What does an oil filter do on a Pontiac V-8?
An oil filter is designed to remove and collect small particles and debris that’s suspended in oil as it circulates throughout the engine. AC provided Pontiac with its oil filters for its V-8s. It’s a high-quality design that’s rather large and offered excellent filtration and flow.