How much HP does a L96 have?
Check out L96 6.0L Engine Upgrade Guide: Expert Advice for L96 Mods to Maximize Performance.] The aftermarket is strong, crate engines are available, and used motors are often cheaply sourced through junkyards….L96 Rotating Assembly.
L96 Rotating Assembly Specs | |
---|---|
Crankshaft Rod Journal Dia. | 2.100 in. |
Reluctor Wheel | 58x |
Is the L96 a good engine?
At 360hp and 380lb-ft. of torque, the 6.0L L96 produces a good amount of power for its purpose. Additionally, the L96 and Vortec engines are built off of GM’s LS engine which are used in the high performance Corvette’s and Camaro’s. Because of their LS roots, they have an excellent base for additional power upgrades.
Is the L96 a LS3?
The L96 (along with the LC8, L76, and LY6) came with high-flowing LS3-type rectangle port heads. These engines start life in trucks, but today you’re just as likely to spot them under the hood of a turbocharged drag car.
How much does a L96 weight?
Accuracy International Arctic Warfare | |
---|---|
Mass | 6.5 kg (14.3 lb) |
Length | 1,180 mm (46.5 in) |
Barrel length | 660 mm (26.0 in) |
Cartridge | 7.62×51mm NATO (.308 Winchester) .300 Winchester Magnum .338 Lapua Magnum |
What is an L83 engine?
The L83 and L8B are both Gen. 5, 5.3L, small block engines used in GM trucks and SUV’s. They are known as the EcoTec3 5.3L engines. These engines are all-aluminum and use Active Fuel Management (AFM), Variable Valve Timing (VVT), and are Flex Fuel Capable (E85). Up to 12% better fuel milage.
Does L96 have AFM?
There is no AFM on the L96. There is VVT, but no AFM.
Does LY6 have VVT?
The LY6 used Variable Valve Timing (VVT). This helped it make more Torque and Horsepower than the previous 6.0L engines. It was available in GM pickups until 2010. It was also available in vans, and SUVs until 2009.
What vehicles did the L96 come in?
GM 6.0 Liter V8 Vortec L96 Engine
Type: | 6.0L Gen IV V8 Small Block |
---|---|
Chevrolet GMC Cab Chassis: | 380 lb.-ft. (515 Nm) @ 4200 RPM SAE Certified |
Maximum Engine Speed | |
Silverado, Sierra, Suburban, Yukon XL: | 6000 RPM |
Express, Savana: | 5600 RPM |
What is a 5.3 engine called?
The L59 engine is a 5.3L Gen. III iron-block engine used in GM trucks and SUVs between 2002 and 2007. It is essentially the flex-fuel version of the LM7. For marketing purposes, it was also known as the Vortec 5300.
What’s the difference between the LY6 and the L96?
The L96 is the Gen IV version of the engine, launching in 2010 and replacing the LY6 6.0L engine. The LY6 is also a Gen IV Vortec engine, however, GM decided to upgrade the engine and add flex fuel capabilities which is the reason for the transition from the LY6 to the L96.
What kind of engine is the GM L96?
The L96 engine is a 6.0L Gen. 4 small block engine used in GM trucks and SUVs from 2010 to 2017. It replaced the LY6 and added Flex Fuel capability. For marketing purposes, it was also known as the Vortec 6000. The information listed here is for a stock engine.
What are the flow numbers of the L96 engine?
The L96 cylinder heads are similar to the LS3 heads, and make good power. The stock heads can be CNC-ported for more airflow and milled up to .030 in. for more compression. Flow numbers can be as high as 373 cfm at .700 lift.
Is the L96 engine the same as the Vortec?
The L96 is virtually the same engine as the LY6 Vortec with the exception of Flex Fuel which was added to the L96 version. Variable Valve Timing: alters valve lift timing to improve fuel economy, performance, and emissions. While variable valve timing is common on all newer generation engines,