How much HP does a H23A have?
H Series Motor Specifications Chart 1
| Engine | Type | Power |
|---|---|---|
| H22A7 | 212 PS (156 kW; 209 hp) | |
| H22A8 | 200 PS (147 kW; 197 hp) @ 7,100 rpm & 156 lb⋅ft (212 N⋅m) @ 5,250 rpm | |
| H22Z1 | 203 PS (149 kW; 200 hp) | |
| H23A | Open Deck | 165 PS (121 kW; 163 hp) & 156 lb⋅ft (212 N⋅m) |
What engine did the Honda Prelude have?
Honda’s venerable B20A engine series powers the entire range, with the base B20A3 2.0-liter SOHC four-cylinder pushing 109 horsepower and 111 lb-ft of torque through either a four-speed automatic or five-speed manual transmission.
Where does the Honda Prelude engine come from?
Honda Prelude H22A VTEC Type S engine imported from Japan. Honda Prelude Engines are very famous and we carry all H23A, H22A VTEC & also Japanese replacement F22B DOHC for H23A Non Vtec Engine.
Is the Honda H23A engine an ordinary engine?
No, unfortunately, it is an ordinary engine. The engine power is 162 HP @ 5800 rpm, the torque is 212 Nm @ 4500 rpm. This engine was installed in Honda Prelude 4th gen. 3. H23A2 Black top was the European version of the H23A1 engine for Honda Prelude 4th gen. 4. H23A3 non-VTEC was the version of H23A2 for European Honda Accord and Rover 623.
What’s the difference between Honda H22A and H23A blue top?
These engines were installed in JDM Ascot Innova. – H23A VTEC Blue top – the top version with the VTEC system. Its main difference was a PDE head, which was very close to the H22A Euro R head. They also increased the compression ratio to 10.6; the Euro R throttle body and 295 cc/min fuel injectors were used here.
What are the intake and exhaust valves on a Honda H23A?
The diameter of the JDM H23A intake valves is 35 mm, of the exhaust valves – 30 mm. In the versions for USDM and EDM, 34 mm inlet valves and 29 mm exhaust valves were used. After every 25,000-30,000 miles, valves are to be adjusted. The valve clearances for a cold engine are as follows: intake – 0.07-0.11 mm, exhaust – 0.15-0.19 mm.