How much horsepower does a 2007 Road King have?
What’s especially impressive is that while a stock TC88 peaks at around 67-68 lb-ft of torque, this Screamin’ Eagle TC110 offers a twistin’ 96.1 lb-ft at 3,100 rpm, and horsepower peaks at 83.1 at 5,000 rpm! The bike smoothes out at speed, and your seat-of-the-pants dyno takes notice!
What size motor does a 2007 Road King have?
| Make Model | Harley Davidson FLHR Road King |
|---|---|
| Year | 2007 – 08 |
| Engine | Four stroke, 45° V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder |
| Capacity | 1584 cc / 96 cu-in |
| Bore x Stroke | 95.2 x 111.2 mm |
What was the problem with my 2007 Road King?
This happened on my 07 street bob. Its likely a loose connection to the neutral sensor. Also the bike would have started with the clutch pulled in, did for mine. No need to pull the batt. The 07 RK’s had bad neutral switches also. I replaced 3 of them.
Why are the turn signals on my Harley Davidson not working?
I’m not getting any power to the right side turn signals, the green arrow on the dash don’t light up on right, and turn signals are very dim and slow on left side. Wiring seems to check out, fuses ok.
Is the security light on on a 2007 RK?
Went riding yesterday with a buddy who has a 2007 RK, at somepoint during the ride he noticed the neutral light and the security light “on”, he was in gear and riding all seemed normal.
This happened on my 07 street bob. Its likely a loose connection to the neutral sensor. Also the bike would have started with the clutch pulled in, did for mine. No need to pull the batt. The 07 RK’s had bad neutral switches also. I replaced 3 of them.
Can a broken turn signal on a Harley Davidson be fixed?
This article applies to the Harley Davidson Touring. A busted or erratic turn signal repair can be a drag to fix, especially on the road. It’s not a showstopper because you can still ride. But turn signals are an essential part of bike safety. Hand signals are fine during the day, yet are hard to see at night.
Why is my hazard light not working on my Harley?
Check the hazard light box and make sure all signal wires are attached. Check the flasher for functionality (turn signal relay). The wiring for the turn signal lights goes through the turn signal switch. This means that the turn signal switch may be bad. If only one light (or one side) isn’t working, check the power to the bulb plug-in connections.
What causes a Harley Davidson motorcycle to wobble?
There aren’t any Harley Davidson model years that are known for a “death wobble” condition. Actually, “death wobble” is usually associated with Jeep Wrangler JK models with bad ball joints. Any motorcycle can have a “wobble” or an unstable feel due to a number of issues. Neck, out of adjustment / neck bearings