How much does it cost to lift a Jeep Wrangler?
You can expect to pay anywhere from $1,000 to $10,000 for a Jeep lift kit, on average. High-quality suspension kits that offer excellent ground clearance and an aggressive look may even top the higher end of the lifting price.
Is it easy to lift a Jeep Wrangler?
You know you’re getting quality and they hold up over time. A body lift is an inexpensive and easy way to lift a Jeep Wrangler. Additional space is added between the body and frame and provides 1 to 3 inches of lift while also keeping the suspension and wheels stock.
How do I lift my Jeep Wrangler?
How to Lift a Jeep Wrangler (JL, JK & TJ)
- Remove the front lower shock bolts.
- Remove brake line bracketry and any other harnesses that might get pulled on while lifting/dropping the axle.
- Remove the sway bar end links.
- Remove the track bar bolts.
- Lower the axle to remove the coil springs.
- Remove the factory spring spacers.
What is the best way to lift a Jeep?
We would recommend a quality Short Arm Lift Kit over most all other lift methods due to the fact that they are a complete suspension system. They generally include all of the necessary components required to lift a Jeep safely while maintaining proper steering and suspension geometry.
What is the point of lifting a Jeep?
Essentially, lifting a Jeep takes the standard off-road capabilities of a Jeep Wrangler and dials them up, giving you more power to tackle off-road terrain, and more crawl ability on even the toughest terrains. So, if you’re looking for more off-road capability around Memphis, lifting your Jeep is a great option.
How do you lift a Jeep Wrangler off the ground?
Starting from the front, remove the brake line bracket to avoid pulling on the brake line. Using the 18mm wrench and socket, remove the sway bar end link on both sides to get the proper clearance to drop the axle down. Remove the shock, starting with the upper mount.
What’s the best way to start lifting a jeep?
If you want to slowly ease your way into the whole “lift kit” thing and are not certain how high you want to go…. a budget boost may be a good starting point but, we recommend that you skip the shock extensions and go with new taller shocks.
How do you measure the lift on a Jeep Wrangler?
The measurement that has come to be the most accurate and accepted is the length of the coil spring in the front and the coil spring length in the back. You measure this with the coils installed on your Wrangler and with your Wrangler on a flat surface so the weight can be distributed evenly to all the wheels.
How many arms do you need to lift a Jeep Wrangler?
” If you lift your Jeep over 4″, 8 adjustable control arms is a good idea. If you are on a budget, start with front lower control arms which are commonly used for adjusting caster (adjusted longer then stock). Front uppers can also be utilized (adjusted shorter then stock).
Should I Lift my Jeep?
Jeeps are meant to be driven on adventures. As such, it’s a good idea to lift your jeep so that you’re able to go up and over the mud and other elements.
How do you lift a jeep?
Lift the Jeep up from the axle until the weight is off the jack stands. Remove the stands from under the axle tube, and lift the stands under the frame as high as possible. Drop the Jeep down on the frame, and allow the axle to drop to full droop. Use channel locks to pull the jounce bumper out of the cup on each side.
What is a jeep lift?
Lift kits basically “lift” the vehicle to an ideal height by using spacers or blocks. The added height allows the Jeep to run easily with bigger wheels and traverse through dirt tracks better. There are many kinds of Jeep lifts nowadays, all offering almost the same results.