How much does it cost to align a timing belt?
The majority of the cost is labor, because many parts need to be removed from the engine to gain access to the belt. A typical timing belt will only cost between $25 and $50, but the repair takes at least a few hours. The labor cost to replace a timing belt can range from $200 – $900.
Can you tighten a timing belt?
To even out the tension in the belt, use a spanner or socket wrench on the crankshaft-pulley bolt and turn the crankshaft two full turns clockwise . Tighten the locking bolt first to hold the tensioner in its new position. Tighten the pivot-spring bolt, which has a precise torque setting.
What do you use to check timing belt alignment?
A simple procedure to check misalignment (both parallel and angular) is by using a straightedge (ruler) to check alignment as the previous illustration shows. The straightedge should be long enough to span the distance between the two outside edges of the timing belt pulley faces.
How do you adjust the timing belt on a camshaft?
When it is correct, tighten both bolts and refit the timing-belt cover and fan belt. Check the timing-belt tension with a spring balance with an L-shaped hook. Pull the belt to align with the marker on the pump intake pipe. Slacken the securing bolts and move the belt tensioner as required to adjust the tension.
Can a taut timing belt stand a strong pull?
While a taut string or timing belt can stand a strong pull. Take up any loose slack in the timing belt by adjusting the center to center distance between the two timing belt pulleys. Before any final tensioning is to be applied make sure that the timing belt teeth are fully seated in the tooth grooves on both timing belt pulleys.
Can a crankshaft be cranked after removing a timing belt?
You should never turn your crank or camshafts once the timing belt has been removed from the engine. You may need to crank the shaft to help correct an alignment problem with your timing marks, but this should only be performed by an experienced mechanic.