How many sketches does the sweep feature require for non circular profiles?
two sketches
The SOLIDWORKS Sweep feature has been improving over the years; unlike Extrude the Sweep feature requires at least two sketches to be selected, namely the Profile and Path.
How do I change the direction of a swept cut in Solidworks?
In the PropertyManager, under Profile and Path, click Sketch Profile and do the following: In the flyout FeatureManager design tree, select Sketch8 for Profile and select Helix/Spiral1 for Path. Click Direction 1 and Direction 2 to toggle the direction of the sweep.
How do I create a sweep path in Solidworks?
To create a sweep:
- Sketch a closed, non-intersecting profile on a plane or a face. If you use guide curves:
- Create the path for the profile to follow. Use a sketch, existing model edges, or curves.
- Click one of the following:
- In the PropertyManager:
- Set the other PropertyManager options.
- Click OK .
What is swept cut?
Solidworks swept cut is features tool, mainly used to cut a solid model or part by sweeping a completely closed profile along an open or closed path. To use swept cut, you should need a closed profile and open or closed path, which may be line, helix, and circle, rectangular or arc etc.
What are the minimum required sketches to create a sweep feature?
Tip: If you require multiple profiles from different sketches, use the Loft command. A sweep feature usually requires a minimum of two unconsumed sketches , a profile and a path, on intersecting planes. In some cases, you can use a single unconsumed sketch for the profile and an existing model edge for the path.
What are the two necessary elements to create a sweep in Solidworks?
To create a sweep:
- Sketch a closed, non-intersecting profile on a plane or a face. If you use guide curves:
- Create the path for the profile to follow. Use a sketch, existing model edges, or curves.
- Click one of the following:
- In the PropertyManager:
- Set the other PropertyManager options.
- Click OK .
How can you tell if you are sketching on a different sketch plane?
How can you tell if you are sketching on a different sketch plane? The coordinate triad has changed its position to represent the position of the plane you are sketching on.
How is a sweep created in Solidworks software?
Sweep creates a base, boss, cut, or surface by moving a profile (section) along a path. A sweep can be simple or complex. To generate the sweep geometry, the software creates a series of intermediate sections made by replicating a profile at various positions along the path. The intermediate sections are then blended together.
How to sketch a closed profile in SolidWorks?
Sketch a closed, non-intersecting profile on a plane or a face. Create the path first if you want to add pierce relations between the path and a sketch point on the profile. Create the guide curve first if you want to add pierce relations between the guide curves and a sketch point on the profile.
When to use follow path or follow path in sweep?
These are 2 of the Orientation/twist types under the Options pane in the Properties Manager when creating your sweep. To summarize, when the Follow Path option is used the profile will be normal to the path. This means if you look at a cross section normal to the path anywhere, the profile will be constant.
How to set propertymanager based on sweep surface?
Set the PropertyManager options based on the sweep surface feature. Under sweep Options, when you select Follow path as the Orientation/twist type, you can select parameters to stabilize the profiles when small and uneven curvature fluctuations along the path cause the profiles to misalign.