How many miles can you drive past maintenance?
Cars can generally go 5,000 to 7,500 miles before needing an oil change. Furthermore, if your vehicle uses synthetic oil, you can drive 10,000 or even 15,000 miles between oil changes.
How to reset Harley boom box service mileage?
Here is the sequence to reset your oil change/service mileage on your Harley Boom Box GTS. 1-Enter service mode on the screen. a-Turn ignition off. b-Wait 15 seconds. c-Turn ignition to accessory (ACC) position. d-Wait ten seconds for the WARNING screen to display. e-Press and hold the power/mute button until the service menu is displayed.
How to reset service intervals on Mercedes Benz?
Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks:
How to reset service intervals on a Mini Cooper?
Resetting indicator alerts for Routine Service Check, Oil Change, and Brakes is super easy for the F56 and F56S. 1) Car should be OFF. 2) With foot OFF of the brake, press the START button once to power up the car but not start the engine. 3) Locate the Trip Odometer Reset button on the speedo, at about the 5 o’clock position.
How to reset maintenance light, reset oil service light?
How to reset maintenance light, reset oil service light. Can be made manually by use button on car dash board. Reset service light indicator Renault Safrane. It was built in years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000. 1. The reset button is located on the bottom right hand side of the Rev counter on the instrument cluster.
Here is the sequence to reset your oil change/service mileage on your Harley Boom Box GTS. 1-Enter service mode on the screen. a-Turn ignition off. b-Wait 15 seconds. c-Turn ignition to accessory (ACC) position. d-Wait ten seconds for the WARNING screen to display. e-Press and hold the power/mute button until the service menu is displayed.
Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks:
How to reset the CX-5 service maintenance reminder?
Press and hold the TRIP BUTTON with the ignition switched off, then switch it on. Keep pressing the selector for more than 5 seconds. The master warning light will flash for a few seconds when the reset is completed. The engine oil flexible maintenance setting is available (only some models).
How do you reset maintenance light on Toyota Prius?
Push and hold down the ODO button and push the Power button twice with your foot off the brake. The flashing dashboard light will go off and the reading on the odometer will reset. This is how you turn off the maintenance light on a Prius. Some models don’t have the ODO/Trip button.