How long will a 2002 Honda Accord last?
If they’re maintained properly, popular models such as Honda Accords and Honda Civics can last between 200,000 to 300,000 miles. With usual car usage, this means that you can use these cars for 15 to 20 years.
How do you replace a belt on a Honda Accord?
Be sure that when replacing the old belt with a new one, you follow the same pulley sequence, which should be shown on a sticker under the hood or in your maintenance manual. If you purchased an OEM replacement belt or any other belt for that matter, the reverse side of the package may also have the diagram.
Why did my Honda Accord DX shut itself off?
A couple of years ago my 1998 Honda Accord Dx started shutting itself off at random times — on freeway onramps, while parked and idling, etc. — so I did some research and found that the electrical portion of the ignition switch had been recalled.
How do you replace ignition switch on Honda Accord?
Route the wiring in the same manner the old switch wiring was routed, insert the switch into the steering column, and put back the ignition switch cover and screws. Use the electrical tape to corral any of the loose wiring. Put all paneling back the way it was by following the above directions in reverse.
What happens if the serpentine belt on a Honda Accord breaks?
As this belt drives the A/C compressor, alternator, power steering pump, and water pump, it is not something to take lightly. If you hear it squealing, see it deteriorating, or having issues with it, get it changed as soon as possible. If it breaks, the water pump stops and the engine will quickly overheat, leaving you stranded on the road.
What should I do before replacing the head gasket on a Honda Accord?
Thoroughly clean the head bolts and stud threads that secure the cylinder head and lightly lubricate with engine oil prior to re-installation. This will reduce strain on the cylinder head and engine block. It will also make it easier to tighten them to the proper torque during reassembly.
How do you replace the radiator on a Honda Accord?
Keep your drain bucket under the lower radiator hose. Use hose clamps to pinch the transmission lines shut. This helps to reduce the amount of transmission fluid you will lose and also makes cleanup easier. Also, be sure the release the transmission cooler line retaining bracket from the radiator so that it doesn’t get hung up.
Where is the coolant drain on a Honda Accord?
Place your coolant drain bucket underneath, and open the drain valve located on the bottom of the radiator. Figure 2. Find the drain plug and remove it. Work on your car while it is cold. Hot coolant can burn you, and many of the parts you will be accessing are right near the exhaust manifold.