How long to diagnose Nissan step motor code P1778?
Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. What does this mean? The cost to diagnose the P1778 NISSAN code is 1.0 hour of labor.
What does 178 mean on a CVT transmission?
Find a transmission shop that works on them as a lot of guys are not in tune with them yet. Manufacturers are slow to teach outside mechanics about them. The two codes are listed in picture for causes, but 178 is the step motor which means it works okay electrically, but mechanically there is something wrong.
What does P1778 stand for in car code?
My car has 216332 miles. Hello P1778 is the code for an issue with the stepper motor function. The CVT transmission on this vehicle uses a 4 position stepper motor to propel the vehicle. If the stepper motor goes bad, or has an issue it will set off the check engine light to notify the driver of the issue.
When does the step motor on / off change?
The step motor’s 4 aspects of ON/OFF change according to the signal from the Transmission Control Module (TCM). As a result, the flow of line pressure to the primary pulley is changed and the pulley ratio is controlled. This diagnosis item detects when the electrical system is OK, but the mechanical system is NG.
What does P1778 mean on a step motor?
P1778 Meaning The step motor’s 4 aspects of ON/OFF change according to the signal from the Transmission Control Module (TCM). As a result, the flow of line pressure to the primary pulley is changed and the pulley ratio is controlled. This diagnosis item detects when the electrical system is OK, but the mechanical system is NG.
The step motor’s 4 aspects of ON/OFF change according to the signal from the Transmission Control Module (TCM). As a result, the flow of line pressure to the primary pulley is changed and the pulley ratio is controlled. This diagnosis item detects when the electrical system is OK, but the mechanical system is NG.
Is the Trans fluid pressure low on a P1778?
Because I do have a P1778 code. But I also have a P0868 which is “trans fluid pressure low”. I have the V6 model, not sure if that matters? BTW, I live in the counry about 30 miles from the Twin Cities, and I sometimes have to go there. The drivers on the road near and in the cities are much more aggressive drivers than us country folks.
How much does it cost to diagnose a P1778 code?
The cost of diagnosing the P1778 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. The step motor’s 4 aspects of ON/OFF change according to the signal from Transmission Control Module (TCM).
How much does it cost to repair a Nissan P1778?
The cost of diagnosing the P1778 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What’s the death code for a Nissan Altima?
P1778 got you down? About 6 months ago I received the death code P1778 (stepper motor) in my 2008 Altima.
How to check Nissan step motor function code?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1778 NISSAN code is 1.0 hour of labor.
What’s the P1778 code for a Nissan Rogue?
Wife has a 2012 Nissan Rogue with 2.5l 4cyl. Throwing code p1778 stepper motor. I bought replacement. Drained fluid almost 7qts and went to installing stepper motor on valve body. I cleaned pan sealed it all up and filled with Nissan ns2 cvt fluid. (6qts to fill line on dip).
P1778 got you down? About 6 months ago I received the death code P1778 (stepper motor) in my 2008 Altima.
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1778 NISSAN code is 1.0 hour of labor.