How long does it take to replace an alternator on a VW Beetle?
Some helpful tips for replacing a very intimidating alternator on a 2000 TDI Beetle. You will swear it will NOT come out, it is very tight, take your time. It took me 4-5 hours to do this job with a lift. Removing the bumper and radiator takes an additional 4-5 hours.The Beetle with the 2.0 gas or 1.8T gas engine is MUCH easier.
How to remove the alternator from a VW Jetta?
Walking it back and forth to aid in removal. Next disconnect the wire connectors. Take the main battery cable off and the connector. Remove the cover on the battery connector and then unscrew it (don’t lose the cover, it needs to go back on when you are done). Remove the cable off and then lift the alternator out. New To Pull-A-Part?
How do you remove serpentine belt tensioner from VW Jetta?
Refer to the Serpentine Belt Tensioner removal video. Remove the two bolts from the alternator. Now that the bolts are out, pull the alternator off the bracket. Walking it back and forth to aid in removal. Next disconnect the wire connectors. Take the main battery cable off and the connector.
How do you remove a serpentine belt alternator?
Refer to the Serpentine Belt Tensioner removal video. Before removing the alternator, you need to remove the serpentine belt tensioner and belt. Refer to the Serpentine Belt Tensioner removal video. Remove the two bolts from the alternator. Now that the bolts are out, pull the alternator off the bracket. Walking it back and forth to aid in removal.
Is there a YouTube error with my VW Beetle?
An error occurred. Please try again later. (Playback ID: mnvF9gyUB8pGsXFi) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.
How long does it take to lift a TDI Beetle?
It took me 4-5 hours to do this job with a lift. Removing the bumper and radiator takes an additional 4-5 hours.The Beetle with the 2.0 gas or 1.8T gas engine is MUCH easier. Just the TDI Beetle is ultra tight. Loading…
What should I do if my alternator is not working?
The solution is to check your car’s manual for the particular fuse that controls the alternator and replace it. In some cars, you might also find another small fuse to the alternator’s control—usually a 15A to 20A fuse. An alternator does usually has 3 or 4 wires to it to function properly.
Is the alternator at the heart of the charging system?
Dan Ferrell writes about do-it-yourself car maintenance and repair. He has certifications in automation and control technology. The alternator is at the heart of the charging system of your vehicle. Alternator problems and charging system problems can affect your vehicle in different ways.
What causes an alternator to go over base voltage?
If you are getting more than 2 volts above base voltage, most likely your alternator is over-charging the battery or the battery is faulty. Other potential problems are a faulty voltage regulator or a problem in the charging system wiring.
How to change or replace the over-running alternator?
We’ve seen many who have their accessory belt and tensioner replaced — thinking the VW belt has a broken cord or that the VW tenisoner spring was weak. But actually the VW over-running alternator was beginning to fail and was the cause of their VW’s accessory belt system problem. Loading…
Is the alternator bulb live on a VW?
The bulb itself is live (taking a black ‘+’ off the board on all aircooled VW’s, so the circuit is Earthing through the alternator (so make sure your gearbox earth strap is in good order).
Do you need an alternator for a 6 volt generator?
Note if you are doing a 6-12 volt conversion you will need an alternator conversion kit which you can find on the left of this page. Note this includes the alternator, a stand which will take the larger bodied 12v alternator, a 12v alternator belt, backing plates for the different spacings and a 12v alternator pulley to match.