How long does it take to change thermostat in car?
The thermostat replacement job should take a mechanic about 1 to 2 hours to complete it. Therefore, you end up paying more money for the labor than you do for the actual thermostat part. A lot of car owners try to save money by replacing the thermostat themselves.
How do you change the thermostat on a Hyundai?
Totally fill the reservoir and crank the engine. Turn the heater to high and allow the engine to idle for about 10 minutes. Now turn it off, allow it to cool for about 3 minutes and recheck the coolant level in the reservoir. If it has dropped, refill it and repeat the process till the coolant level remains full.
How does the thermostat in an accent work?
The thermostat in your Accent is part of the cooling system. When you engine is cold, the thermostat stays closed so that the engine will warm up faster. When the engine warms up to operating temperature, the thermostat opens up and the coolant circulates though the radiator to keep the engine from overheating.
How do you change the thermostat on a car engine?
Place a new thermostat gasket over the mounting surface on the engine block. Place a new thermostat into the block in the same orientation as the old thermostat. Place the thermostat housing back over thermostat and tighten the retaining bolts with a socket and ratchet. Open the radiator cap and place a funnel in the opening.
Why is my thermostat not working in my car?
If both thermostat and fans are good then the problem could be due to a blown head gasket or a bad water pump. The cooling system should be checked for contamination with hydrocarbons and for excessive pressure. Both symptoms are indicative of a blown head gasket. Make sure that circulation is OK and that the radiator hoses are free.
How to find the best Hyundai Accent thermostat housing?
Enter your VIN for the most accurate results. We offer a full selection of genuine Hyundai Accent Thermostat Housings, engineered specifically to restore factory performance. Please narrow the Engine Coolant Thermostat Housing results by selecting the vehicle.
How long does it take to cool a Hyundai thermostat?
Turn the heater to high and allow the engine to idle for about 10 minutes. Now turn it off, allow it to cool for about 3 minutes and recheck the coolant level in the reservoir. If it has dropped, refill it and repeat the process till the coolant level remains full. Usually this will need 2 to 3 cycles.
When did the accent thermostat come out?
The Accent was introduced in 1995 and replaced the Excel, which had been around since 1985. The thermostat in your Accent is part of the cooling system. When you engine is cold, the thermostat stays closed so that the engine will warm up faster.
What does the thermostat do on a Hyundai Elantra?
The thermostat in a 2003 Hyundai Elantra is mounted to the engine block and acts as a regulator for the coolant in the cooling system. The thermostat makes sure that the coolant flows when it has to, and stays still when it doesn’t.