How does the SmartKey work on a Jeep Grand Cherokee?
Then with the key in the OFF position, press the C/T and Reset buttons on the Overhead Console (EVIC), Turn the Ignition Switch to the ON Position (not Start the Engine), and release both buttons, and then a message will appear on the Overhead Console Screen, and tell you if the Test has been passed or not.
How can I unlock a locked steering wheel?
1. Try pulling the key out a very small amount before gently turning key. (About 1/16 of an inch, the thickness of a nickel). 2. Wiggle key while trying to turn key gently.
What causes a locked steering wheel to not turn in?
If a locked steering wheel is the only thing preventing your key from turning the ignition, then follow our instructions below for How to Unlock a Locked Steering wheel and you will be back on the road fast. Problem 2. Dirt, pocket lint or debris (like tape from opening a package) may cause your key not to turn in your ignition lock cylinder.
Why is My Jeep Grand Cherokee not recognizing my key?
It is the ignition switch. It is not recognizing your key correctly. The car basically thinks it is being stolen and shuts down. The dealer changed my ignition switch in Nov. of ’06 and I have not had the same problem since. Fortunately for myself the Jeep was still under warranty. I can’t imagine this is cheap.
How do you program a key to a Jeep Cherokee?
Call around to your local locksmiths. Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing. My locksmith only charges me $35 for the programing (per key).
Why does my Jeep Grand Cherokee not start?
It might be the ignition switch, but the Jeep is still driveable. If it was the ignition switch, it would just shut down after a few seconds after starting the engine. I have a 2001 JGC and one day I went to start the Jeep and all the dash board icons were lit up along with all my gauges being dead.
Why does my Jeep Grand Cherokee not have a smart key?
“No CCD/J1850 messages received from the Smart Key Immobilizer Module (SKIM)” The smart key system seems to be the issue. My understanding is that the anti-theft system is operated by shutting off the fuel pumps, so this makes sense. Additionally I get the icon of a key with a line through it for on the dash when trying to start the car.
Call around to your local locksmiths. Most guys can come to your Jeep and program the keys to the Jeep. If the key light is on in the dash, the Jeep is not recognizing the RFID in the key. I am not sure what would cause the ECU to lose the key programing. My locksmith only charges me $35 for the programing (per key).
What to do if your Jeep Grand Cherokee won’t start?
When a starter goes bad, they will usually not give you much warning first. Also, if you are stuck somewhere and are trying to start your Grand Cherokee, the old beat the starter with a hammer trick is not a wives tale. It really can get that one last start out of it.
When to reset the Immobilizer on a Jeep Grand Cherokee?
The system is activated when something other than an authorized key is used to try to start the engine. Most models are also equipped with an alarm system as part of the security system. If something triggers the immobilizer or the alarm system, you need to reset and rearm the system.