How does the pitman arm shaft seal work?
This shaft is responsible for sending all force and direction from the steering box to the pitman arm and steering components. The fluid within the steering box must remain inside of the unit, despite the shaft being a potential source of leakage. For this, the pitman arm shaft seal is used.
How do you remove pitman arm from steering box?
Step 4: Remove the pitman arm from the steering box. Insert the pitman arm removal tool into the gap between the steering box and the retaining bolt. Using a ratchet, turn the tool’s center screw until the pitman arm releases. Tip: You can use a mallet to help in the removal of this end of the pitman arm if necessary.
What happens when power steering input shaft seal is damaged?
When the power steering input shaft seal is damaged, hydraulic fluid can leak from the power steering input shaft, and eventually cause the system to overheat or break down entirely. Step 1: Disconnect the battery and lift the vehicle. Before removing any parts, locate the vehicle’s battery and disconnect the positive and negative battery cables.
How big is the bolt on a pitman arm?
The large bolt connecting the pitman arm to the steering box must be removed first. The bolt is typically 1-5/16”, but can vary in size. It will be torqued and will most likely need to be removed with a breaker bar. Using the appropriate tools, remove this bolt.
What makes a pitman arm shaft seal seal?
This shaft is responsible for sending all force and direction from the steering box to the pitman arm and steering components. The fluid within the steering box must remain inside of the unit, despite the shaft being a potential source of leakage.
How do you replace a pitman arm shaft?
Step 7: Install the new seal. Insert the new pitman arm shaft seal around the shaft. If necessary, take the old seal or a large socket and set it against the new seal. Gently tap the old seal or socket with your mallet to push the new seal into place. Then remove the old seal or socket. Insert any gaskets as needed in the order they were removed.
How do you Grease a pitman steering box?
Grease the area around the shaft where the pitman arm attaches to the steering box. Spread grease down and around the steering box. This will help to protect against dirt, grime, and water which can prevent the steering linkage from working properly. Apply liberally in the area, but wipe off any excess.
How is the pitman arm connected to the steering box?
In most vehicles, steering boxes are equipped with a shaft that connects to the pitman arm. This shaft is responsible for sending all force and direction from the steering box to the pitman arm and steering components. The fluid within the steering box must remain inside of the unit, despite the shaft being a potential source of leakage.