How does the LS control system harness work?
The LS Control System harness is designed to plug into the output speed sensor of 4L60 & 4L80 Transmissions, which have a 40 pulse output. NOTE: If you are using the CP Supermatic Connect and Cruise Transmission Control System, the vehicle speed input must be plugged in.
What is the Check Engine Light code for Saturn?
P1272Accelerator Pedal Position Sensor 2 P1273Accelerator Pedal Position Sensor 1 P1274Injectors Wired Incorrectly P1275Accelerator Pedal Position (APP) Sensor 1 Circuit – Read Our Article on Automotive Circuit TestingFor Help With This Saturn Check Engine Light Code P1276Accelerator Pedal Position (APP) Sensor 1 Performance
How do you adjust the driver’s seat in a Saturn Astra?
Adjust the driver’s seat only when the vehicle is not moving. To move a manual seat forward or rearward: 1. Lift the bar to unlock the seat. 2. Slide the seat to the desired position and release the bar. Try to move the seat with your body to be sure the seat is locked in place. Seat Height Adjuster
Where is the MAF sensor on a LS?
• Ensure the MAF Sensor is mounted in the middle of a minimum 6 inch length of 4 inch diameter tube, and is a minimum of 10 inches from the throttle body. • Ensure the fuel pressure is a constant 400 kPa (60 psi) with the engine running. This is what the control system has been developed to run.
How does cruise control work on a LS-series PCM?
The TAC module is wired to a motor mounted within the throttle body assembly and uses PCM data to change throttle angle to maintain cruise control vehicle speed. The cable throttle cruise control module shown here also uses PCM data to maintain cruise control vehicle speed, but must manually pull the throttle linkage to change throttle angle.
When do you disengage the cruise control module?
Disengaging Cruise Control: The cruise control module retains the set vehicle speed in its memory until it loses 12V power through the cruise control on/off switch or the vehicle’s ignition switch.
How does resume / Accel switch work on cruise control?
Sliding the resume/accel switch requests the cruise control module to take over throttle blade angle and accelerate the vehicle to the previously set vehicle speed. Sliding and holding the resume/ accel switch increases vehicle speed until the switch is released. The new vehicle speed is stored in the cruise control module’s memory.
Where are the fuses located on a Saturn L?
Saturn L-Series (1999 – 2004) – fuses box diagram Year of production: 1999, 2000, 2001, 2002, 2003, 2004 Floor Console Fuse Block The driver’s side instrument panel is located under the instrument panel on the driver’s left side. Saturn L-Series – fuse box – instrument panel (driver’s side) Fuses Usage RADIO Audio, OnStar®, Rear Seat DVD (Option