How does the heater work on a Honda Accord?
The heater uses engine coolant to warm the air. 1. Adjust the fan speed using the fan control dial. 2. Select . 3. Adjust the temperature using the temperature control dial. 1. Set the fan to the maximum speed. 2. Select . 3. Set the temperature to maximum warm.
How to control the temperature in a Honda Accord?
For your safety, make sure you have a clear view through all the windows before driving. Do not set the temperature near the upper or lower limit. When cold air hits the windshield, the outside of the windshield may fog up. If the side windows fog up, adjust the vents so that the air hits the side windows. 1. Set the fan to the maximum speed. 2.
How to turn on fresh air on Honda Accord?
1. Turn the fan on. 2. Press the A/C button to turn on the air conditioning. When you select , the mode automatically switches to fresh air. Change to fresh air mode as soon as the interior gets warm enough.
How to adjust the fan speed in a Honda Accord?
1. Adjust the fan speed using the fan control dial. 2. Select . 3. Adjust the temperature using the temperature control dial. 4. Press the A/C button (the indicator on). 1. Set the fan to the maximum speed. 2. Set the temperature to maximum cool. 3. Press the button (the indicator on).
Why does my Honda Accord have no heat?
One of the most common (and inconvenient) problems with the Honda Accord is when it has no heat coming from the heater. Not having a functioning heater makes driving much less comfortable, and can be a sign of certain issues. At the simplest level, there are two main reasons why the heater is not working.
How can I keep my Honda Accord warm?
1. Set the fan to the maximum speed. 2. Select . 3. Set the temperature to maximum warm. 4. Press the button (the indicator on). When used in combination with the heater, the air conditioning system makes the interior warm and dry and can prevent the windows from fogging up. 1. Turn the fan on. 2.
How to turn on the air conditioner in a Honda Accord?
1. Turn the fan on. 2. Press the A/C button to turn on the air conditioning. When you select , the mode automatically switches to fresh air. Change to fresh air mode as soon as the interior gets warm enough. The windows may fog up if kept in recirculation mode. 1. Adjust the fan speed using the fan control dial. 2. Select . 3.
1. Adjust the fan speed using the fan control dial. 2. Select . 3. Adjust the temperature using the temperature control dial. 4. Press the A/C button (the indicator on). 1. Set the fan to the maximum speed. 2. Set the temperature to maximum cool. 3. Press the button (the indicator on).
How to replace the blower motor assembly on a Honda Accord?
Before replacing your blower motor assembly, check the fuse to make sure it hasn’t blown out. Your owner’s manual will have information about which fuse controls the blower motor assembly.
How do you remove a fuse from a Honda Accord?
Removing these fuses requires a Phillips-head screwdriver. Check the smaller fuses in the under-hood fuse box and all the fuses in the interior fuse boxes by pulling out each fuse with the fuse puller provided in the under-hood fuse box. Look for a burned wire inside the fuse.
How do you remove an engine from a Honda Accord?
Secure the hose under the firewall and remove the power steering pump. Use a wrench to remove the bolts on the air compressor and remove the compressor. Raise the front end of the Honda Accord with a hydraulic jack. Position jack stands under the frame and lower the car onto the stands. Use the ratchet set to remove the transmission bolts.
Before replacing your blower motor assembly, check the fuse to make sure it hasn’t blown out. Your owner’s manual will have information about which fuse controls the blower motor assembly.
Where is the heater duct on a Honda Accord?
The heater duct is located on the left side of the blower motor assembly. Figure 2. Remove self-taping screws holding heater duct in place. Remove the passenger’s side floor mat. Turn over the passenger’s side carpet, and pull it back as far as you can without tearing it.
How do you remove a heater from a blower?
Set aside the cover. Unplug the plug on the top left of the blower motor assembly. Use the Phillips screwdriver or 10mm deep socket ratchet and extension to remove the metal band holding the blower assembly to the heater assembly. This connection is on the left side of the blower assembly. Set aside the metal band.
What should I do about my 1998 Honda Accord?
This category covers 1998, 1999, 2000, 2001, 2002 Honda Accord models. Replace the spark plugs on your 98-02 4-cylinder Honda Accord. How can I get the factory alarm to permanently cut off? 2000 honda accord tail and dash lights not working.