How does the fan clutch work on a Jeep Wrangler?
The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan. When working properly, the fan clutch will react to the heat discharging from you radiator by spinning faster or slower depending on the cooling needs of your engine.
How to tighten the clutch on a Jeep Wrangler?
Use a 1/2″ socket to secure your Jeep’s fan to the new clutch and tighten the bolts to 15-18 ft. lbs. of torque. 10. Place your Jeep’s radiator fan shroud over your fan and carefully lower both into your engine compartment being careful not to make contact with the radiator.
How to remove a fan from a Jeep Wrangler?
Continue removing your Jeep’s radiator fan by rotating the nut COUNTER-CLOCKWISE (as viewed from the front of your Jeep) and then carefully pull it and the fan shroud out from your engine compartment. NOTE: Make sure to avoid any contact with your Jeep’s radiator as the fins on it can be easily damaged.
How to loosen water pump pulley on Jeep Wrangler?
To loosen the nut securing it to the water pump pulley, give your fan wrench a tap with a hammer on the left hand side (as view from the front of your Jeep) 6.
How to make a jeep TJ 4.0L fan clutch?
1. Disconnect your Jeep’s radiator overflow bottle hose from the radiator. 2. Remove your Jeep’s radiator overflow bottle from the fan shroud and set it aside vertically so that no coolant spills out. 3. Using a 7/16″ socket, remove the 4 bolts securing your Jeep’s radiator fan shroud to the front clip.
Use a 1/2″ socket to secure your Jeep’s fan to the new clutch and tighten the bolts to 15-18 ft. lbs. of torque. 10. Place your Jeep’s radiator fan shroud over your fan and carefully lower both into your engine compartment being careful not to make contact with the radiator.
How much does a jeep fan clutch cost?
You should expect to pay about $70. This is what a Fan Wrench looks like. You can pick one up from most any auto parts store for about $5. The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan.
Continue removing your Jeep’s radiator fan by rotating the nut COUNTER-CLOCKWISE (as viewed from the front of your Jeep) and then carefully pull it and the fan shroud out from your engine compartment. NOTE: Make sure to avoid any contact with your Jeep’s radiator as the fins on it can be easily damaged.
What kind of clutch does a Jeep Wrangler have?
The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan.
The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan. When working properly, the fan clutch will react to the heat discharging from you radiator by spinning faster or slower depending on the cooling needs of your engine.
The fan drive viscous clutch (or fan clutch for short) is a silicon fluid filled coupling with a bimetallic coil that is attached to your Jeep’s fan.
To loosen the nut securing it to the water pump pulley, give your fan wrench a tap with a hammer on the left hand side (as view from the front of your Jeep) 6.