How does the clutch work on an air conditioner?
Otherwise the A/C compressor engages and starts to compresses the refrigerant. By compressing the refrigerant we add pressure to the system. The A/C compressor clutch engages to create the high pressure in the refrigerant and it’s state is controlled by the Air Conditioner Control Unit.
Where are the low and high AC pressure switches located?
The low-pressure side switch is found before the AC compressor, while the high-pressure switch comes after the compressor. Most AC pressure switches are found within the engine compartment, but some manufacturers put them elsewhere. A look in your service manual will show you the appropriate location for your model. AC Pressure Switch Function
How to diagnose a / C compressor clutch problems?
Start by turning the engine on. Set the AC to maximum cold setting. Open the hood and look at the serpentine belt to locate the AC compressor. Now look at the pulley of the air conditioner compressor. The center part (the clutch) should be engaged and should be spining along with the pulley.
Why does my a / C CLUTCH not spin when I Turn on the AC?
The center part on the pulley of the A/C compressor will not spin when you have the air conditioner off or if there is a problem. Once you turn on the AC the center part of the compressor, the AC clutch should engage and start to rotate with the pulley.
The low-pressure side switch is found before the AC compressor, while the high-pressure switch comes after the compressor. Most AC pressure switches are found within the engine compartment, but some manufacturers put them elsewhere. A look in your service manual will show you the appropriate location for your model. AC Pressure Switch Function
Why do you need clutch on AC compressor?
The Compressor is not meant to run all the time. That is why the clutch assembly is necessary. The computer can turn it on when needed, then off when it has done its job.
Why is my AC high side pressure not correct?
The correct reading will display once the clutch engages and the gauge stops cycling. If there are readings on both the high and low sides but they are not the correct specified pressures, it means that certain parts of the AC system are not functioning properly, such as the expansion valve, compressor, and clutch.
How does a high pressure AC system work?
To measure the pressure in the high-pressure side of your system, you need a little fancier piece of equipment. The pressures in the high-pressure side of your system are so high that it requires special hoses and connections along with a special gauge to contain the pressure and ensure you don’t release any of the refrigerant to the atmosphere.