How do you wire up fog lights?
Locate a suitable body connection point and drill a 7/64-inch hole in the body. Crimp an “eyelet” connector on the ground wire and screw a sheet metal screw through the “eyelet” and into the body. This must be done for the switch, the relay and each of the fog-lights. The relay ground terminal is numbered “85”.
Why do I need a relay for LED lights?
Relays can be used to switch a low-current trigger to high current, switch a circuit on or off, reverse polarity, and much more. When adding LED lights, such as off-road light bars, driving/work lights, or other auxiliary lights to a vehicle, you must add a circuit to power the light adequately.
Why use a relay instead of a switch?
While a relay does add an extra step to the switching process, the main advantage is that you can leave the actual switching of high-power circuits for things like off-road lights or air compressors in the engine compartment, and control that switching with a much smaller amperage circuit that energizes the relay’s …
Where is the fog light relay on a Toyota?
Cut the Red and white wire and use a butt connector to connect the wires together. (The fog lights will turn on when the headlights are on only.) 4. You have to buy a Fog light relay from toyota 37 bucks, it is located behind the ash tray right behind the climate control. You plug it right in the empty spot on the right side on the top. 5.
What kind of transmission does a Toyota 4Runner have?
Transmissions – mechanical or automatic, with four speeds. In 1986, the chassis design was slightly modified: instead of a continuous Toyota 4Runner axle, it received an independent front suspension that improves comfort and handling. Repair Manual Toyota 4Runner 1984-1995 All compact models with a gasoline engine
How do you hook up a fog light?
1. All you have to do is pop open the steering column cover. 2. Disconnect Turn signal/headlight connector 3. Cut the Red and white wire and use a butt connector to connect the wires together. (The fog lights will turn on when the headlights are on only.)
When did the Toyota 4Runner go into production?
The 4Runner SUV was put into serial production in 1984. The car was intended, first of all, for the American market (the version for Japan was called Hilux Surf). As a basis for creating the model was taken a pickup truck Hilux.