How do you unlock the gear shift on a Subaru?
Remove the small plastic cover near the shifter. This will expose the shifter release. Press the brake pedal and keep it pressed. Insert a screwdriver and press down the shift lock, and at the same time, move the shifter out of Park.
How do I turn off shift lock release?
To turn off Sticky Keys, press the shift key five times or uncheck the Turn On Sticky Keys box in the Ease of Access control panel. If the default options are selected, pressing two keys simultaneously will also turn off Sticky Keys.
How do I get my gear shift unstuck?
Follow these 6 steps to release a stuck shifter
- Set the emergency brake.
- Insert key into the ignition and turn the ignition switch to the “ON” or “RUN” position.
- Locate the shift lock override slot located on the shifter console near the shifter lever.
Why would the gear shift get stuck?
An open circuit in the shift interlock electrical system can cause the shifter to become stuck in Park if the open circuit interrupts communications between the brake light switch or the ignition switch and the interlock solenoid. If power is present, the shifter interlock solenoid is bad.
Why does a Subaru have a shift lock system?
The purpose of Subaru’s shift lock system is to prevent the shifter lever from coming out of the “Park” position and the ignition key from being removed from the ignition cylinder without specific inputs from the driver, such as, the ignition key is on, the stop lamp switch depressed and shifter lever in park.
Which is part of the shift lock system?
Shift Lever Lock System: The Shift Lever Lock system consists of the shifter lever assembly (referred to as “Select Lever Complete”), the stop lamp switch, and the shift lock solenoid. Both sub-systems are controlled by the Body Integrated Unit (BIU).
Is there a way to get a Subaru out of Park?
These instructions show you how to use the shifter lock release to get a Subaru out of the park and place it in reverse or drive. This will allow you to move the shifter out of Park and drive. This works on Subaru Impreza, Outback, Crosstrek, Forester, etc.
Where is the P range switch on a Subaru?
When the ignition switch is on, and the shifter lever is in the park position, the Body Integrated Unit monitors the “P” (park) range switch (located in the shifter lever assembly) operation by sending a 12vdc low amp current to the “P” range switch.