How do you turn on the dash lights on a Toyota 4runner?
To turn on the system press the VSC OFF switch. The Auto LSD and VSC OFF indicators will then come on. To turn the system off just press the switch again.
How do you reset the low tire pressure light on a Toyota 4Runner?
To reset the system, first make sure the tire pressures are correct. Turn the engine on, then press and hold the reset button. You’ll find it low and to the right of the steering wheel on the instrument panel. Hold the button down until the TPMS indicator light in the instrument panel blinks slowly 3 three times.
What to do if your dash light does not work?
#Test the dashboard light bulbs. If the fuses are working properly, check for a blown bulb in the dashboard. Following the manufacturer’s instructions, disconnect the battery while working on the dash, remove the faceplate covering your vehicle’s dashboard gauge panel. Remove the screws holding the plate on. Carefully remove the faceplate.
What to do if your Toyota Dashboard Light goes off?
Have the vehicle inspected by your Toyota dealer immediately. Have the vehicle inspected by your Toyota dealer immediately. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Indicates a malfunction in the vehicle’s charging system.
When does the warning light turn off on a Toyota?
If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off. The indicator light flashes after the ENGINE START STOP switch has been turned off to indicate that the system is operating.
Where is the fuse on the dash light?
The fuse box may be under the hood, or near the floor, near the brake pedal, or there may be two fuse boxes in both places. Refer to the diagram on the fuse box cover to locate the correct fuse. Replace the dashboard light fuse if necessary. Note: also check if the tail lights are working.