How do you reset the service indicator on a Mercedes E500?
Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator appears in the display. Press the reset knob for about 5 seconds until the SERVICE MENU appears in the multifunction display. Select the CONFIRMATION menu with the (plus) or (minus) button.
What does service a mean on a Mercedes-Benz?
Service A involves: Replacing the vehicle’s oil filter and Mercedes-Benz motor oil. Checking all fluid levels and correcting them as recommended by the factory. Checking and correcting tire pressure.
How do you reset the service indicator on a Mercedes?
Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6.
How to reset Mercedes-Benz E Class W211 service light?
A simple guide on how to reset the oil service exceeded maintenance reminder indicator message on Mercedez-Benz E-Class W211 from the year 2002-2003-2004-2005-2006-2007-2008-2009. Close all doors, gear to the park position. Turn the ignition to position 1.
How do you reset the service indicator on a Honda Accord?
Scroll to “Full Service.” Press the scroll forward button until “Conf. Full Serv.” is highlighted. Confirm the selection, and reset the service indicator by pressing the “OK” button. Once the service indicator is reset, place the ignition back to position “0.” Figure 6. Confirm full service and reset the indicator.
Where is the accept phone call button on a Mercedes Benz?
Hold the “Accept Phone Call” button located on the right side of the steering wheel. While holding the button down and within five seconds, press and hold the “OK” button on the left side of the steering wheel. Figure 3. Hold “Accept Phone Call” and “OK” buttons.
Where is the service light indicator on a Mercedes?
Turn key in steering lock to position 2. To call up the trip odometer and main odometer, press either of lower two buttons on left hand side of steering wheel (system select looks like file folder) until the display appears. Press either of the top buttons on steering wheel (arrows) until the FSS indicator appears.
How to reset service intervals on Mercedes Benz?
Instructions on how to do that on several different models are shown below. The second method is to use a OBD II scanner such as the iCarsoft MB II which allows you to reset the service intervals on most Mercedes-Benz models. The Service A maintenance appointment will include the following tasks:
A simple guide on how to reset the oil service exceeded maintenance reminder indicator message on Mercedez-Benz E-Class W211 from the year 2002-2003-2004-2005-2006-2007-2008-2009. Close all doors, gear to the park position. Turn the ignition to position 1.
Why is the SRS warning staying on on a Mercedes Benz?
Why is the SRS warning staying on? Here is a list of some of the most common problems with the SRS system on a Mercedes Benz. Seat Occupancy Senor in the passenger seat. Low voltage in the electrical system. Battery issue or charging. Seat belt latch. Damaged Wire Contacts at the doors. Defective, damaged or loose contact at the impact sensors.