How do you reset the security on a Nissan Altima?
First You will need to lock the vehicle using the key in the driver’s door and then unlock it using that key as well. Next You will need to put the vehicle in the on position without the engine running and wait for the antitheft light to turn off. This can take up to 5 minutes.
Why does my Nissan Altima have no spark?
I am now pushing a 2005 Altima with 2.5l because it will spin over but fails to start. No codes show on my snap-on scanner. It has no spark, the tack does not move. We changed the crank sensor, and no change. My scanner said that it should have 5 vdc on one pin of the connector and that the sensor should ohm out at 165 to 200 ohms.
What kind of car is the Nissan Altima?
The Nissan Altima is a mid-size automobile manufactured by Nissan, and is arguably a continuation of the Nissan Bluebird line, which began in 1957. 2003 nissan atimal it cranks won’t fire or not getting any fuel don’t hear fuel pump when come on.
Why is my ECM not communicating with my car?
No check engine light not even a bulb check. Fans come on when I turn key to on. Power to ECM through harness, I don’t recall what ports but the ones I was told to check. ECM relay clicks, swapped with known good. Swapped IPDM with known good.
How to know if your engine has no spark?
First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.
I am now pushing a 2005 Altima with 2.5l because it will spin over but fails to start. No codes show on my snap-on scanner. It has no spark, the tack does not move. We changed the crank sensor, and no change. My scanner said that it should have 5 vdc on one pin of the connector and that the sensor should ohm out at 165 to 200 ohms.
The Nissan Altima is a mid-size automobile manufactured by Nissan, and is arguably a continuation of the Nissan Bluebird line, which began in 1957. 2003 nissan atimal it cranks won’t fire or not getting any fuel don’t hear fuel pump when come on.
No check engine light not even a bulb check. Fans come on when I turn key to on. Power to ECM through harness, I don’t recall what ports but the ones I was told to check. ECM relay clicks, swapped with known good. Swapped IPDM with known good.
Why does my Nissan club have no spark?
It has no spark, the tack does not move. We changed the crank sensor, and no change. My scanner said that it should have 5 vdc on one pin of the connector and that the sensor should ohm out at 165 to 200 ohms. When I tested the plug I had 12 vdc and the sensor reads open across all the pins. Did you rebuild the motor? did it die when driving.