How do you remove bulb cluster from 2005 Chevy 1500?
Remove the three screws that secure the instrument cluster to the dash of the 2005 Chevy 1500. Put the screws in a safe place for reattachment later on. Unplug the connector and remove the cluster. Unlock the bulb cluster and remove the the worn-out bulbs by turning them counterclockwise and pulling them out.
Why is the right turn signal light not working?
Back probe the wire that supplies power to the right turn signal lights; the test light should not light. If the test light illuminates, replace the switch. Repeat the test, but this time operate the switch so the right turn signals light.
How do you change the dash lights on a Dodge Ram?
Remove the two screws at the top of the instrument cluster bezel, and unclip the bottom and sides. Remove it to reveal the actual gauge cluster and its bolts. Figure 4. Instrument cluster bezel. Remove the four screws that hold the cluster to the dashboard, and pull it out enough to unhook the harnesses from behind.
How do I change the bulb on the indicator on the door mirror?
Press in aspherical mirror lens (2) on outer side up to stop (arrow). 6. Push out aspherical mirror lens (2) in direction of window (arrow). REMOVAL Mirror Removal 1. Open the door and unclip cover (1). 2. Remove the bolts from the outside mirror (2). 3. Slide the mirror up and out of hook mount (6) and pull off of the vehicle door. 4.
What are the warning lights on a Dodge?
What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Dodge. Click a link to learn more about each one.
Why are the lights on my tow truck not working?
Check the fuse on the powered converter to ensure it is still functional. Take a look at the tow vehicle lighting fuses. Examine the wiring on the trailer side and vehicle side for in-line fuses. If the blown fuses continue, it might be the result of the circuit being overloaded. One solution is to replace the trailer lights with LEDs.
Remove the two screws at the top of the instrument cluster bezel, and unclip the bottom and sides. Remove it to reveal the actual gauge cluster and its bolts. Figure 4. Instrument cluster bezel. Remove the four screws that hold the cluster to the dashboard, and pull it out enough to unhook the harnesses from behind.
Press in aspherical mirror lens (2) on outer side up to stop (arrow). 6. Push out aspherical mirror lens (2) in direction of window (arrow). REMOVAL Mirror Removal 1. Open the door and unclip cover (1). 2. Remove the bolts from the outside mirror (2). 3. Slide the mirror up and out of hook mount (6) and pull off of the vehicle door. 4.