How do you remove a door panel from a car?

Insert a screwdriver into the edge of the armrest cover and pry it off. The armrest cover may be concealing a fastening screw. Take a flathead screwdriver and wedge it into the crack at the edge of the panel. Apply gentle pressure to pop it out and remove it.

How do you remove a window from a car?

Some cars may have a manual window crank that needs to be removed. Take a metal pick tool and wedge it behind the crank. Locate the small clip wire holding it in place and slide it out from behind the crank. Then, pull the crank straight out with your hands to remove it.

Can you remove the door panel on a Savana?

It’s easy to remove the door panel on a Chevy Express or Savana if you know how to do it; it’s easy to ruin the panel if you don’t know how to do it. The door speaker size for the Chevy Express / Savana is 6.5″ Subscribe: http://www.youtube.com/subscription_c…

Where are the trim pieces on a door panel?

Most door panels will have small trim pieces located at the top of the panel at either the right or left side. Use a small screw driver or trim removal tool and detach (pop off) any trim pieces above the door panel.

How do you remove fascia from a door?

Use a small screw driver or trim removal tool and detach (pop off) any trim pieces above the door panel. Here is an upper trim piece to the left of the panel. These pieces must be removed before removing the panel. 2. Remove Plastic Fascia Pieces

How do you remove a speaker from a door?

Remove speaker mounting screws to remove the speaker. Be careful not to puncher the speaker cone with the tool. Once the speaker is loose disconnect the wire harness connector by releasing the wiring connector safety clips. 5. Remove Door Panel Check that all mounting hardware and small hidden doors have been opened.

Can a door panel be replaced on a Chevy Silverado?

1A Auto shows you how to repair, install, fix, change or replace a door panel. Door panels need to be removed to access the inside components of the door, like the window regulator or exterior door handles. This video is applicable to the 15 Chevy Silverado 1500

How to remove the interior door panel on a GMC?

Remove the triangle panel located behind the mirror There are 3 push clips on the back side. One is at the top and one is at the front corner, both attached to the metal door frame. The third is in the back corner attached to the top of the door panel. I kind of tugged on the top corner to release that clip, then the front, then the back.

Do you need to remove door panels on a Ford F250?

1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video applies to the Ford F250 and F350, years 99, 00, 01, 02, 03, 04, 05, 06, and 07.

How to replace a broken interior door handle on?

Here is a quick video on how you can remove and replace your broken interior car door handle. These tend to break on many different makes and models, good news is the replacement procedure is somewhat similar for all of them and fairly easy. Just follow the instructions in the video and you should be able to do it. Good Luck

How do you remove the door panel on a Toyota Landcruiser?

Remove the screw. 6) Moving to the sides of the door, (2) plastic clips on the outer side and (1) plastic clip on the inner side. These are circular clips. Remove them by pushing the center in ever so slightly. Not too hard or the center part falls into the door. Once pushed in, remove the clip by prying on the outer edge.

How to remove a fixed sliding glass door panel?

How to Remove a Fixed Sliding Glass Door Panel. 1 Step 1. Remove the threshold placed in front of the fixed sliding glass door panel. Use a flat-head screwdriver to remove the threshold from the floor. 2 Step 2. 3 Step 3. 4 Step 4.

What’s the best way to replace a door?

Unbolt each bolt one at a time (do not remove all of the bolts at once). Paint a thin film of thread locker onto the bolt thread. Re-position the bolt and tighten it down. Repeat this process with each bolt that you had to remove during the door replacement.

How do you remove trim from a door panel?

Let’s Get Started. 1. Remove Small Trim Pieces. Most door panels will have small trim pieces located at the top of the panel at either the right or left side. Use a small screw driver or trim removal tool and detach (pop off) any trim pieces above the door panel. Here is an upper trim piece to the left of the panel.

What’s the best way to remove a car door?

Pry off the cover at the edge of the window with a screwdriver. Look for a small, triangular cover piece at the top edge of the door panel, where the window connects to it. Wedge your fingers into the edge of the cover piece and gently pull against it to remove it.

Can a novice remove a car door panel?

All door panels basically perform the same task though the process a door panel removal will vary slightly for each vehicle. In most cases a novice can perform this job. Once the door panel has been removed be cautious of how it is stored during the repair. Most door panels are made of cloth and can pick up dirt and stains easily. What Goes Wrong?

How to remove interior door panel on Jeep Cherokee?

On the 95 Cherokee in particular you’ll need to pull the door handle area out and to the right just a little bit. Check for aftermarket speakers which may need to be unscrewed and removed before you can get the panel off.

Do you need to remove door panel of Hyundai i30?

Need to remove door panel of Hyundai i30 drivers door. Door opens from outside but from inside the handle is no longer ‘taut’ but has enough spring to return to closed position Clicking this will make more experts see the question and we will remind you when it gets answered. You can’t post conmments that contain an email address.

How to remove front door panel 04-10 Toyota Sienna?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: b3in_pK-54ew7blw) An error occurred while retrieving sharing information.

How do you take a door panel off a 1991 Chevy S10?

How to Take Off a Door Panel on a 1991 Chevy S10. Open the driver side door and locate all of the securing screw that are running along the frame of the door. Pry the window knob off of the door using the flat head screw driver. Slide the flat head screw driver between the door panel and the bottom of the widow know.

How can I clear my front door frame?

Pull the door panel loose from the bottom and work your way up both edges (forward and rear). Once you have all the clips pulled out, you need to lift the door panel up to get the top of it to clear the door frame where the window goes up / down.

How do you remove a Pontiac door handle?

Remove the screw behind the bezel with the Phillips screwdriver. Remove any screws behind the door pull or behind the interior door handle with the Phillips screwdriver. The amount and location depend on your year and model Pontiac. Remove the screws located at the bottom and side of the door panel with the Phillips screwdriver.

How do you remove the door panel on a Toyota Tacoma?

Pull up on the towel at the point where the handle connects to the door to release the snap ring. Remove the snap ring and pull the handle straight off of its shaft. Pry off the covers over the two screws on the arm rest to access them.

How do you remove a car door handle?

Remove any screws holding the inner door handle. Grasp the handle and remove it by pulling upward. Be cautious of the linkage attached to the handle as not to bend or break it. Use a small screwdriver to push the plastic clip over the linkage and release it from the handle.

What does a door panel on a car do?

A door panel, sometimes called a door card, acts as an interface separating the interior of your vehicle to the different components hidden inside your vehicle door such as electrical wirings, window control mechanisms and door locks. Basically, it is the hard material that covers and protects your door’s mechanisms from being exposed.

Can a car door panel be replaced by oe?

Although do-it-yourself custom door panels are becoming a thing, OE and OEM replacements are still the perfect hassle-free option. It will also ensure that your door panel fits perfectly in your car door. Having a loosely fitted door panel may pose danger to you and your passengers.

Is it worth repairing the driver’s side door?

It’s not worth repairing and the trick is going to be if you can actually get a door skin for that car. It may be available as a complete door only so you should call the dealer parts dept. and ask about this.

How much does it cost to remove a door panel?

Once the problem is repairs the door panel can be reinstalled. What Does it Cost? When you are taking you car into a repair garage or dealership to have the door panel removed it will cost between $55.00 and $95.00 (US) depending on the design or manufacturer. There is a video of this job being done at the bottom of this guide. 1.

What do you need to remove a car door panel?

This padded cardboard item is held on by a series of screws and plastic clips that must be removed to service such items as a window switch , door lock and window motor and regulator. All door panels basically perform the same task though the process a door panel removal will vary slightly for each vehicle.

What makes a car door panel get damaged?

Your vehicle door panel can be damaged for a number of reasons including too much exposure to sunlight, water leaks and a lot more. Before cleaning your door panel, make sure to remove all materials stored inside the compartments. You may use a vacuum to remove dust and dirt.

How do you replace a door panel on a VW?

Pull off the window recess seal from door trim and insert in window recess. Before installing door trim, check all clips and replace as necessary, and insert into mounts of door trim. After connecting battery, check that the vehicle equipment (radio, clock, electric windows) is operating properly.

What to do if your car door lock actuator is broken?

Step 2: Open the affected door. Get into the vehicle from another door if the door you are working on will not let you enter the vehicle. Open the door with the broken or damaged actuator from the inside of the vehicle. Step 3: Rule out the door lock. Try operating the door lock switch to rule out the idea that the door lock is not working.

What happens when the actuator on a door is down?

When the actuator moves the latch up, it connects the outside door handle to the opening mechanism. When the latch is down, the outside door handle is disconnected from the mechanism so that it cannot be opened. This makes the outside handle move without moving the latch, preventing the door from opening.

Are there any problems with the door latch on the Hyundai Sonata?

Hyundai Sonata owners have reported 34 problems related to door latch (under the latches/locks/linkage category). The most recently reported issues are listed below. Also please check out the statistics and reliability analysis of Hyundai Sonata based on all problems reported for the Sonata.

What was the name of the Hyundai Sonata that broke off?

Two of the door handles broke off in one day, on the consumers vehicle. The contact owns a 2010 Hyundai Sonata. The contact attempted to open the driver’s side rear door when the exterior door handle fractured in half.

Is there a recall on a 2003 Hyundai Sonata?

The contact owns a 2003 Hyundai Sonata. He received recall 09v171000 pertaining to rust on the frame. He was not satisfied with the method used to correct the recall repair. He stated that the manufacturer placed stickers on the door handle and that they were unfolding due to the temperature in his state.

What’s the best way to replace interior door panels?

Add value and style to your vehicle’s interior by replacing those cracked and faded door panels easily and inexpensively. Made of tough material, the replacement part will not crack or split even under extreme… Kick Panels by Coverlay®. Improve your vehicle’s interior by replacing your old or damaged kick panels.

How do you remove a door panel on a Hyundai Accent?

On most models, there is a plastic cover over the hole. Remove the covers and the screws. Remove the screw that holds the plastic cover just in front of the door handle and remove the cover. There is a triangular cover on the top front of the door panel that covers the mounting surface for the outside mirror.

How is the door panel on a Hyundai held on?

Hyundai door panels are held on primarily with trim fasteners which resemble large plastic stove bolts. They have a large, round, flat head and serrated shaft that hold through use of friction from the serrations. A common screwdriver and a Phillips screwdriver will be needed.

How do you remove a trim fastener from a door?

Insert the common screwdriver between the door panel and the door at the upper most level of the rear of the door panel and slide it down until it contacts the first trim fastener. Carefully pry the fastener from its hole in the door. It is good to note that these door panels are nothing more than cardboard covered in material.

What should I remove from my door panel?

Look behind the door panel and disconnect the electrical connectors from the window switch, door lock switch and the mirror as well. Remove the electrical connector that leads to the lower left marker light. Don Bowman has been writing for various websites and several online magazines since 2008.

How do you remove interior trim on a Honda CRV?

1. Fold up the rear seat. 2. Detach the hooks (A) from the cargo area side trim panel (B) and B-pillar lower trim (C), and pull the rear door sill trim (D) up by hand to detach the clips (E, F). 3. If necessary, pull the rear side outer trim (G) up to detach the clips (H, I), then remove the trim.

When do replacement door panels come out on Amazon?

Only 13 left in stock – order soon. . . Only 5 left in stock – order soon. . In stock on February 22, 2021. . . Only 14 left in stock – order soon.

Why is the rear door panel on my Ford truck stuck?

Usually caused by a broken cable housing preventing you from triggering the latch. Some people call this cab style: extended cab, Quad Cab, or King Cab. This is not for the SuperCrew, Double cab, Crew cab, or CrewMax. Please subscribe to my channel, share, or like this video.

What should I do about my Dodge Caravan sliding door panel?

To avoid this, cancel and sign in to YouTube on your computer. WHO WAS WRONG? Semi attempts wide turn across 2 lanes of traffic. Little people lawn mower! Lower the handlebar for kids or short people An error occurred while retrieving sharing information. Please try again later.

How do you remove a car door panel?

Removing a car door panel begins with removing any items that may be holding the door panel to the door that are not clearly visible. Discover how to remove a door latch, and what tools are needed to remove car door panels with help from an auto mechanic in this free video on car repairs.

How can I remove a car door latch?

Discover how to remove a door latch, and what tools are needed to remove car door panels with help from an auto mechanic in this free video on car repairs. Bio: J.B. Hebert is a machinist, metal fabricator, and auto mechanic who has been fixing and modifying all things mechanical for over 20 years. Loading…

How to get rid of Honda Fit front door panel?

To avoid this, cancel and sign in to YouTube on your computer. DIY Tutorial | Product Reviews In this channel, I will go over many different automotive car upgrades, modifications and maintenance procedures.

What to do if your front door panel is broken?

Electrical wirings, window control mechanisms, and other internal components hidden in your vehicle’s doors may get exposed if one or more of your door panels are broken or damaged. Replace them right away with top-notch door panels from CarParts.com.

What’s the best way to remove a door panel?

What to do if you have a loose screw on a door?

Set the screws aside and swing the hinge plate away so it’s not covering the loose holes. If you are fixing just a few loose screw holes for something that has multiple hinges, like a door, you can put a wedge underneath it to support it while you unscrew the loose hinge and fix the stripped holes.

Use a small flat blade screw driver to gently pry the bezel up from the to edge of the latch. Then pry down on the bottom edge of the bezel. Once it’s off, you’ll see either hidden screws or spring release latches. Remove those and the door handle will come out. Start at the bottom of the trim panel and insert the door panel removal tool.

Can a full door panel be replaced with fasteners?

You just open and close the door, and go. But over time these fasteners can pry loose from road vibrations and trail riding, and can take the panels with them. So, whether you have full or half doors, we offer several different panel designs such as diamond plating or factory-type replacements, in order for you to gain the look you want.

How to remove front door panel in Infiniti G35?

1. Remove mask of inside handle portion and remove screws. 2. Insert taping flat-bladed screw driver into edge portion, disconnect pawls, and remove grip finisher. 3. Remove screw of grip portion 4. Insert driver rolled with cloth between panel on vehicle and clips (as indicated with arrow), and remove finisher. 5.

How to remove interior door panel on GMC Sierra k1500?

1A Auto shows you how to remove or replace the interior door panel trim on your 96 GMC Sierra K1500. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more.

Can you remove a door panel on a Mercedes Benz 126?

Removing a 126 chassis door panel and doing related door maintenance and repair are all fairly easy jobs for the do-it-yourselfer. FITS THE FOLLOWING: all 126 chassis sedans from 1981-1991. door check straps (2) for your 126 chassis Mercedes Benz. Fits all 126 chassis sedans 1981 to 1991.

What kind of door panels are on a 126 chassis?

This includes the 300SD, 380SE, 380SEL, 500SEL, 420SEL, 560SEL, 300SE, 300SEL, 300SDL, and 350SDL. Removing a 126 chassis door panel and doing related door maintenance and repair are all fairly easy jobs for the do-it-yourselfer.

When do I need to remove the door panels?

Door panels have to come off when fixing power windows, power seat switches and wiring, door check straps, door latches and locks, and clearing drains. Lubrication is a key factor in preventing premature failure on a number of interior door components.

How do you remove a wood door pull?

Remove the Phillips screw that is exposed. Set the panel and the screw aside. Pry off the trim that is behind the door pull. Start at the front edge and work towards the bottom edge to release it. Remove the Phillips screw that is exposed. Set the trim piece and the screw aside. Pry off the screw cover at the bottom back edge of the door.

What’s the best way to replace a Nissan door hinges?

Drive the pin into is holes in the hinges with a punch and hammer. In most cases, the upper hinge pin points downward while the lower points downward. Test the door and hinges by removing the stands/blocks and lifting the door up and down; it shouldn’t move more than 1/16 of an inch.

What’s the best way to remove door trim?

You’ll need a door panel trim removal tool (available at any auto parts store for about $5) to remove them. Rivet fasteners are also popular. They operate like a plastic drywall anchor; you push them into place and then they expand as you drive in either a screw or a plastic “rivet.” Remove the screw or rivet first.

Remove the screws at the bottom edge of the door panel near the speaker. Remove the retaining clips at the back edge of the door panel near the door latch by popping the center button up on the fastener. Lift the door panel up until the clips disengage and the door panel can be removed away from the door.

How do you remove a power window door handle?

Slide the door handle forward and out. Disengage the two rods, starting with the upper one first. Set the plastic clips aside. Disconnect the power window wiring. Pry off the interior panel near the side mirror using the plastic trim tool. Disconnect the speaker wiring and set the trim panel aside.

How to remove glass from front door window?

9 Carefully peel back the waterproof sheet from the door. 10 Remove the door weatherstrip and rubber end block. 11 Lower the window and, working through the aperture, disconnect the linkage arms from the bottom rail. 12 Lift the glass upwards from the door.

How to remove regulator from front door window?

38 Carefully peel back the waterproof sheet from the door (see illustration). 39 Lower the glass so that the channel and regulator attachments are accessible through the door aperture. Detach the ball and socket joints (two for the front door, one for the rear door).

What causes a car door panel to fade?

One of the main culprits of any faded interior material is the Ultraviolet rays from sunlight exposure. Too much sun exposure can dry up materials such as vinyl and plastic. This will cause your vehicle’s interior door panel to fade and eventually split apart. There are a number of reasons why you will need to detach your door panel at one point.

When to remove the front door panel on a Chevy Silverado?

1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video applies to the Chevy Silverado LT or GMC Sierra SLE, model years 2007-2013.

What should I do if my car door handle is broken?

Check to make sure the handle is not broken. There should be a cable or rod attached to the handle. If there is not, you found the problem and need either a new clip or handle. Remove the inner door panel retaining screws.

What to do if your car door can’t be opened from the inside?

Remove the inner door handle. Look for a screw in the bezel, under the handle lever. Some models have handles that have no screw but are held on by locks, which are disengaged by sliding the bezel either forward or back. Check to make sure the handle is not broken.

How to remove a stuck power window in a car?

Disconnect the two plastic wire switches: You can use a flat-head screwdriver to pull the connectors apart. Put the door console aside. Remove the door panel: Using your hands or a flat-head screwdriver, gently start at the front edge of panel and pry it off.

What’s the best way to fix an off track window?

Press down on the tool gently to pop the door panel out. You may need to do this in multiple spots around the panel to fully remove it. Though any thin tool can be used, ranging from small crowbars to thin pieces of metal, specialty panel removal tools will make the job easier. Remove coverings and unplug any wires connected to the door panel.

How do you remove a car door console?

Remove the plastic covers and take out all five screws. Next, lift the door console up and out of the panel. Pry it up using a flat screwdriver at the back, and then push the entire console towards the back. Lift it out. Under the console, disconnect the two plastic wire connectors.

How to reset Nissan Almera airbag warning light?

Put your key in the ignition and turn it until the dashboard lights come on. Do not start the engine. Press the button on the inside of the door (pictured below) 5 times before the airbag warning light comes on (you have about 5 seconds so don’t panic). Turn the key all the way off as soon as the airbag light goes off.

How to remove front door card on Nissan Navara NP300?

How do you remove chrome trim from a car?

Locate a corner or end of the chrome trim that you want to remove. Slowly peel up the corner. If the corner won’t peel, carefully use a flat head screwdriver to pry it up without scratching the paint. Peel the chrome trim away from the surface of the car. Peeling too fast can cause the trim to break and leave no edge to lift up.

Why does my drivers side window not work?

A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?

How to replace driver door module and passenger door?

Position the door module in the hole on the door panel. Check that the lower mounting for the door module is correctly located in the support on the door panel Press the door module into place Connect the connectors Install the nut and screw Install the door panel.

How to fix door window falling off of track?

Chevrolet GMC Door Window falling off of track easy fix!! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

How do you remove trim from sprinter door?

It will pop right off. Remove the trim around the door latch by simply prying it up with a chisel or other prying too. Similarly, you’ll pry off the trim rings that cover the two bolts on the top of the door panel as well as the trim ring that goes around the door lock. Once all of the trim is removed, there should be six bolts exposed.

What to look for when removing door trim?

Check along the latch side of the door trim panel. And don’t forget to check under reflectors. Here’s one under the door pull area. Don’t forget to check under reflectors and along the latch side of the door panel. If your door panel has carpet, feel for screws hidden along the bottom edge of the carpet.

How do you install a door trim panel?

During installation, the assembler simply hooks the top of the door trim panel on the window ledge and presses the panel against the door frame. They smack the door panel with a rubber mallet to force the Christmas Tree fasteners into the holes. As the fasteners enter the holes, their “limbs” expand and hold the panel.

How do you remove a power window panel?

Disconnect the power window wiring. Pry off the interior panel near the side mirror using the plastic trim tool. Disconnect the speaker wiring and set the trim panel aside. Use the screwdriver to remove the screw at the top of the door panel beneath the mirror panel that was just removed.

Where to remove retaining clips on door panel?

How to remove the SRS door panel on a Mercedes?

Remove the SRS logo on the door panel using a plastic wedge or a flat screwdriver. You should see a screw that you will need to remove. Use a plastic wedge to pry out the door panel. There are several clips that hold the door panel in place that can be removed easily.

How do you remove interior door on Acura RDX?

Using your flat head screwdriver, gently pry off the small trim piece. Remove the trim piece, then remove the two Phillips screws inside. Figure 1. Remove inside trim piece. Figure 2. Remove two Phillips screws. Remove the trim piece covering the handle that you pull the door from. To do this, first locate the two tiny holes on the bottom of it.

What to do if your car horn is no longer working?

If there’s still no sound, make sure that a bad horn is indeed the problem by running a jumper wire directly to the battery terminals. If one horn is defunct, replace it.

Why does my car horn sound weak when I press the switch?

The relay safeguards the car wiring and installation from overload, especially if there is a more powerful car horn. These are some of the main symptoms which you’ll come across when the car horn isn’t working: When pressing the horn switch the car horn sounds weak.

Can a broken horn switch cause a problem?

Broken wires can also cause problems although more rarely. This usually happens if there was physical damage or the wiring was heavily bent (like near the connector). Horn switches are incorporated within the steering wheel.

How can I get the glass out of my screen door?

Push up on the upper glass until it moves about 1/2 inch up into the door frame, then pull the bottom of the glass out a little toward you. Pull down on the glass and it should slide out. If the glass has been there for many years, it can be tricky. Just be patient and work it loose gently.

Do you need to remove door panels on a Dodge Ram?

1A Auto shows you how to remove or replace the interior door panel trim on your vehicle. You need to remove the door panel for a number of different repairs, for example door handles, window regulators, power window motors, door locks and more. This video applies to the Dodge Ram, years 94, 95, 96, 97, 98, 99, 00, and 01.

Is there a way to replace a Chevy Silverado door?

Refurbish your vehicle’s interior with a new stylish upgrade that installs in minutes and lasts a lifetime. Made of ABS plastic, this combo kit will not crack or split even under extreme conditions. Door Shells by Replace®.

What to do with a damaged Cadillac door seal?

Put your vehicle back in top shape and replace your chipped, scratched, dinged, or otherwise damaged auto body parts with the high quality and affordable price of Sherman products. Designed with OE quality and…

Which is the best part to repair a car door?

Dorman has all the components needed for a complete repair. Quickly and easily installed, it eliminates the clunking noise that may result when this part fails, while restoring original ride control. Armrests by Coverlay®.

How can I remove the trim from my front door?

Remove the push-pin fastener used to secure the trim piece to the door. Locate the door release on the inside of the door. There will be a plastic cover cap that is in the door panel behind the door release. Use the small pry bar or a flat-head screwdriver to remove the plastic cover cap.

How do you remove door trim on a Lincoln Navigator?

Pull out the bolt and then remove the door release. Pry off the mirror triangle trim piece on the upper right corner of the driver’s-side door and remove the push-pin fastener. If you are working on the passenger-side door, the trim piece will be in the upper left corner.

Where are the screws on the door panel?

The mounting screws on the door panel are located under the armrest cover. First, disconnect the negative lead (black) from the battery terminal. Open the door and use a trim removal tool to pry out the armrest cover. Remove the two Hex screws with your T27 Torx screwdriver.

Navigation