How do you remove a CV axle from a Kia?

Wiggle the knuckle off, or place a pry bar between the strut and the knuckle until they are separated. Push or tap the CV axle shaft through the wheel hub until the two are separated. III. Removing the CV Axle From the Transmission Remove the splash guard that covers the crank shaft and harmonic balancer.

How does a CV joint work in a rear wheel drive car?

Inner CV joints connect the drive shafts to the transmission, while the outer CV joints connect the drive shafts to the wheels. Many rear-wheel drive and four-wheel drive cars as well as trucks also have CV joints.

What do you need to replace a CV joint?

A CV joint replacement kit should include new band clips, a new rubber boot, grease and the CV joint itself. Slide the smaller of the two band clips onto the drive shaft, followed by the smaller end of the rubber boot.

What are the different types of Kia repair manuals?

Our Kia Automotive repair manuals are split into five broad categories; Kia Workshop Manuals, Kia Owners Manuals, Kia Wiring Diagrams, Kia Sales Brochures and general Miscellaneous Kia downloads. The vehicles with the most documents are the Sportage, Other Model and Rio.

How do you remove the CV axle nut?

Remove the CV axle nut cotter pin. Using a 32-mm socket attached to a powered impact driver, torque the CV axle nut off of the CV axle. If no powered impact tool is available, brace the wheel hub from moving by taking a long and strong metal bar (such as a crowbar) and bracing the bar on the ground and on two wheel hub lugs.

How do you replace a brake line on a Kia?

Remove the brake line clip that holds the brake line to the suspension strut. A pair of pliers can help pull the clip off. Remove the two nuts that hold the brake caliper assembly to the steering knuckle. Pull the caliper away from the brake rotor. Support the caliper so that the brake line is not stretched and potentially damaged.

How do you remove the hub from a CV axle?

Tape the steering knuckle joint with a hammer (hitting the knuckle where the rod goes through and not the threaded portion of the tie rod) to help remove it. Unbolt the hub from the strut tower.

What’s the best way to change an axle?

By this time, you can put the wheel back on the vehicle (again, the same as you would when changing a tire). After the wheel is on, you can lower the car off the jack and jack stands. Tighten the axle nut. Finally, you can retighten the axle nut once the vehicle is back on the ground.

Tape the steering knuckle joint with a hammer (hitting the knuckle where the rod goes through and not the threaded portion of the tie rod) to help remove it. Unbolt the hub from the strut tower.

What to do when you remove axle from CV joint?

It’s normal for some transmission fluid to leak out as you remove the axle from the cv joint. You should put down a catch pan. On your vehicle, the axle may have to pass through an enclose piece called a wishbone before it’s completely free. You can remove the band from the inner boot to help the old axle pass through.

How to replace the front drive shaft on a Kia Sorento?

Remove the brake caliper mounting bolts, and then place the brake caliper assembly (B) with wire. 3. Remove the coking nut (A). The front hub coking nut should be replaced with new ones. After installation coking nut (A), stake the coking nut using a chisel and hammer as shown in the illustration below. 4.

How to remove the coking nut on a Kia Sorento?

After installation coking nut (A), stake the coking nut using a chisel and hammer as shown in the illustration below. 4. Remove the brake hose (A) and wheel speed sensor (B).

How long does it take to replace CV joint in Kia Sorento?

Therefore, if the axle is replaced it can prove to be an added advantage where both CV joints are obtained at the cost of one along with a lower installation cost. The labor time is usually 1.5 hours. What can be done if a jolting knock or ‘klonk’ is heard from the transmission while reversing the 2006 Kia Sorento?

Is the Kia CV joint related to the Kia?

Or, is experiencing vibration while driving related to the Kia CV joints? CV joints are part of the axle or the suspension system of the car. If they are worn, it usually causes loud, noticeable clicking or unfamiliar noises. It can also cause tight or pronounced turns in either direction or on hard turns at slow speed.

Can a CV joint be replaced on an axle?

To deal with this, the CV joint can be replaced, however, in today’s market, an entire axle (which includes CV joints) can be obtained at a reasonable price. Therefore, if the axle is replaced it can prove to be an added advantage where both CV joints are obtained at the cost of one along with a lower installation cost.

What causes CV axle to separate in Kia Optima?

Grease prevents friction and heat from destroying the moving parts of your Kia, and that includes the CV joints. It holds the two halves of the Optima drive axle together, and a crack allows them to separate. That’s when the transmission doesn’t power the wheel anymore, and your car doesn’t function.

Where can I get a CV axle for my Optima?

With our axle, you can relish in wide turns and maneuver your daily driver as you please. AutoZone stocks the CV boots, joints and axles for Kia Optima at great low prices. Order online from AutoZone and enjoy Same-Day Store Pickup.

How do you replace a CV axle on a Kia Sportage?

This video and discussion show you how to remove and replace the right (passenger side) CV axle on a Kia Sportage. A nylon strap or rope can be used to “snap out” the axle from the transmission. This repair can also be performed on a Hyundai Tuscon (2005-2007).

How to replace the CV axle on a Kia Tuscon?

A nylon strap or rope can be used to “snap out” the axle from the transmission. This repair can also be performed on a Hyundai Tuscon (2005-2007). This five-minute video will provide you with visual step-by-step help for completing the removal and replacement of Kia Sportage passenger side CV axle.

What are the components of the Kia Rio?

1. Engine Control Module (ECM) 2. Manifold Absolute Pressure Sensor (MAPS) 3. Intake Air Temperature Sensor (IATS) 4. Engine Coolant Temperature Sensor (ECTS) 5. Throttle Position Sensor (TPS) [integrated into ETC Module] 6. Crankshaft Position Sensor (CKPS) 7.

How much does it cost to replace an axle on a Kia Spectra?

received a Axle / CV Shaft Assembly Replacement. Kia Spectra CV Axle / Shaft Assembly Replacement costs $244 on average. What are CV Axles and how do they work? All front wheel drive and all wheel drive cars use CV axles. “CV” is short for constant velocity. You have your engine and transmission in the car.

How do you replace a CV axle in a Chevy Sonic?

You notice lots of heavy black axle grease inside of your wheel or on the ground around your car. Vibration at highway speeds. How mechanics replace CV axles. Verify the axle shaft needs to be replaced. Remove wheel and replace the faulty axle. Torque all fasteners and wheels to factory specifications. Check tire pressure. Perform a road test.

How much does it cost to replace cv shaft on Kia Spectra?

CV Axle / Shaft Assembly Replacement Estimate for Kia Spectra Kia Spectra CV Axle / Shaft Assembly Replacement costs $246 on average.

How do you replace a CV axle in a Ford Escape?

How mechanics replace CV axles. Verify the axle shaft needs to be replaced. Remove wheel and replace the faulty axle. Torque all fasteners and wheels to factory specifications. Check tire pressure. Perform a road test. Is it safe to drive with a worn out CV axle?

Navigation