How do you remove a bench seat from a Nissan Quest?
There are two bolts on the left and two bolts on the right, and they pass through the bottom of the bench seat leg. Remove the two bolts from the front of the seat legs the same way you took out the rear bolts. Do this from the front of the seat.
How to remove the rear seat on a Nissan Sentra?
Tighten the rear seatback assembly bolts to specification. Refer to SE-22, “Exploded View”. Place the rear seatback assembly (LH) in the folded down position. Release the J-hook retainer (A) and unzip the seatback trim zippers (B). Remove two nuts (A) and the armrest assembly. Installation is in the reverse order of removal.
How to remove the second row seat on a Nissan Rogue?
Remove the seat front bolts (A). Slide the seat to the full forward position. Using a suitable tool release pawls and remove rear bolt covers RH (2) and LH (1) (with third row seat). :Pawl. Remove the seat rear bolts (A). Fold the seatback to the flat position, then remove the seat from the vehicle. INSTALLATION.
How do you remove a third row seat?
Remove the seat front bolts (A). Slide the seat to the full forward position. Using a suitable tool release pawls and remove rear bolt covers RH (2) and LH (1) (with third row seat). :Pawl. Remove the seat rear bolts (A). Fold the seatback to the flat position, then remove the seat from the vehicle.
How do you remove the seat cushion on a Nissan Sentra?
Lift up the seat cushion assembly close to the front edge (B) to release it from the seat cushion hooks (A) (one for each side) and remove the seat cushion assembly. Installation is in the reverse order of removal.
How do you remove a bench seat from a car?
Your car may not have the bench seat bolted down. It may simply latch into the car floor. To remove this kind of seat, simply fold down and then lift up on the latches. There is typically latch at the front and back of the seat.
How to remove the bolster from a Nissan Sentra?
Removal and Installation – Rear Seat Bolster REMOVAL Remove the seat cushion assembly. Refer to SE-23, “Removal and Installation – Seat Cushion Assembly”. Remove the seat belt from the seat belt guide. Remove the bolt at bottom of rear seat bolster. Lift the rear seat bolster to remove. INSTALLATION
What do you need to know about the Nissan Sentra rear seat?
Rear seatback assembly (RH) Seatback striker Seatback latch release knob Seatback latch assembly Seatback silencer (RH) Rear seatback frame (RH) Seatback latch release knob finisher Rear seat bolster trim (RH) Rear seat bolster pad (RH) Rear seat bolster (RH) Seatback trim (RH) Seatback pad (RH) Seatback hinge bracket (RH) LATCH bracket (RH)