How do you read an airbag code?
The airbag codes are double digit numbers. To read the codes, count the number of times the light flashes, wait for the pause and count the flashes again. For example, two flashes, a pause and four flashes mean that your airbag system’s problem is a code 24.
Can you clear an airbag code?
No, scanners cannot clear these codes. These codes are stored after a vehicle accident and are also known as crash data. Also, these codes are hardware issue codes. Hard Codes require professional reset services like us.
How do you reset passenger airbag?
How to Reset an Airbag Light
- Put the key into the ignition and turn the switch to the “on” position.
- Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
- Repeat Steps 1 and 2 two more times.
Can you reset airbag module?
All airbag control modules can be reset and reprogrammed, with the exception of flood, fire or hardware damage.
What does the code on the air bag indicator mean?
If the system detects any problems, it gives you a signal through the airbag indicator by flashing the light several times, giving you the specific problem the test has detected. These flashes are codes, each having its own meaning. The supplemental restraint system (SRS) warning light is most commonly known as the airbag system light.
Is there a problem with the airbag control module?
Wiring or Harness around the airbag control module shouldn’t be severed or damaged anywhere (not very common… but a possibility) Finally – If all these common problem areas all check out fine, then the final possibility to consider is that the airbag module is internally faulty / fried.
Where is the SRS airbag control module located?
In most GM cars it is under the driver or passenger seat. Disconnect the positive battery cable and wait 3 min. You are now safe to unplug the airbag control module harness wiring plugs. All airbag srs components must be installed and connected properly before installing the airbag control module.
How does the airbag light code work on a Ford?
These codes are signaled by five flashes, a two-second pause and the number of flashes that corresponds to the second digit.