How do you put a pin in a jeep door?
With a friend or a jack holding the door so all the holes line up, tap the pin into place. Odds are the pin is tapered slightly to help get it started. Lightly tighten the hinge bolts. Our Jeep’s pin had to be tapped in from the bottom, to clear the door sheet metal.
How do you replace the hinges on a car door?
With the pins tapped out, it’s a simple task to remove the inner hinge by unscrewing the bolts that hold it to the A-pillar. Press or tap the new bushings into the removed hinge half. Installation is the reverse of this procedure. With a friend or a jack holding the door so all the holes line up, tap the pin into place.
Why are the hinges on my Chevy Tahoe sagging?
1A Auto shows you how to fix your sagging and sloppy door hinges on your 88 to 98 Chevy or GMC Silverado Sierra Pickup Truck and 92 to 99 Suburban, Yukon , Tahoe SUV. Worn out hinge pins can cause the doors to open or close poorly and even jam.
How do you remove a car door holder?
Unbolt the door holder from the body of the car. Note: In some vehicles the door holder is an integrated piece on one or both of the door hinges. If you find this is the case, skip to the next step. Unbolt the hinges. Unbolt the hinges from the door. Remove the door. With the bolts removed, the door should basically fall away from the car body.
With a friend or a jack holding the door so all the holes line up, tap the pin into place. Odds are the pin is tapered slightly to help get it started. Lightly tighten the hinge bolts. Our Jeep’s pin had to be tapped in from the bottom, to clear the door sheet metal.
With the pins tapped out, it’s a simple task to remove the inner hinge by unscrewing the bolts that hold it to the A-pillar. Press or tap the new bushings into the removed hinge half. Installation is the reverse of this procedure. With a friend or a jack holding the door so all the holes line up, tap the pin into place.
What makes the hinges on a car door droop?
Pry the worn-out bushings from the hinge half. The worn OEM bushings were made of brass cloth wrapped with some sort of fiber, and had worn until there was metal-to-metal contact, allowing the door to droop nearly an inch. 5.
Why are the hinges on my car door not working?
Then tackle the lower hinge. There are two reasons for this: First off, there are probably a bunch of wires that run into the door to run power windows and locks, and you don’t want to have to hold the door still enough to keep from tearing them free as both hinges are disconnected.