How do you manually use cruise control?
To use Cruise Control, turn it on first by pressing the button on the end of the control stalk behind the lower right side of the steering wheel. The green cruise control icon will appear in the instrument display to show the system is ready. Then accelerate to the speed you want, and press the stalk down to set it.
Is Elantra adaptive cruise control?
For added safety, the available Adaptive Cruise Control (ACC) system automatically and continuously adjusts your pre-set driving speed to maintain a pre-determined distance from the vehicle ahead. The 2018 Elantra features seven standard airbags including a driver’s knee airbag for added protection.
What fuse is for the cruise control?
The cruise control fuse is normally found in the fuse panel located below the steering wheel. Remove the cover of the fuse panel and locate the fuse for the cruise control using the fuse diagram on the fuse panel.
Do you need cruise control in the ICC / BCM?
You will most likely need to activate cruise control in the ICC/BCM using Ford IDS. Have a look at this thread, they may be able to assist you. More sharing options… Thanks for your reply. Yes, I’ve read the thread you’ve linked and tried altering all the parameters mentioned in that.
How does cruise control work on a Falcon XT?
I did note at the time however, the “CRUISE” word would appear on the cluster LCD when the cruise button on the steering wheel was pressed, which indicated the cruise hardware should be wired up correctly. I could not test the cruise though, as the speedo wasn’t working which would obviously be required for cruise control to function.
Do you need a Ford ID for cruise control?
We have never done this before so we can’t really give you any advice on doing this. You will most likely need to activate cruise control in the ICC/BCM using Ford IDS. Have a look at this thread, they may be able to assist you.