How do you lower Softail shocks?
Turn the shock adjuster plates inward — clockwise — away from the jam nut to lower the spring pre-load and smooth out the ride for lighter loads. Make sure you turn the shock adjuster plates an equal number of turns for each shock. Tighten the jam nut on each shock absorber in a clockwise direction.
How do you adjust the shock on a Softail?
Loosen, but do not remove, the jam nut on each shock absorber in a counter clockwise direction with an adjustable wrench. Using a shock-absorber-adjustment spanner wrench, turn the shock adjuster plates an equal number of turns and in the same direction on both shock absorbers. Always turn the adjuster plates at least one full revolution.
What’s the best way to adjust the shock on a Harley?
Turn the shock adjuster plates outward towards the jam nut (counter clockwise) to raise spring pre-load for heavier loads. Turn the shock adjuster plates inward away from the jam nut (clockwise) to lower the spring pre-load and smooth out the ride for lighter loads.
How is the rear shock spring preload adjusted?
The rear shock spring preload may be adjusted to the total load, or may be varied to suit your own personal comfort. The more preload you add, the stiffer the ride will feel. Your service manual will help you determine the correct number of preload turns (adjustment) for your estimated total weight.
Is it OK to lower a Softail bolt?
Remember changing the height of the rear axis will also change the trail of your front end. Thats where the handling comes into realm of the whole picture. Short answer: Don’t do it. If you have to then only lower about an inch and only with good quality shocks – not lowering bolts. Air shocks may be an exception but the price jump is significant.
Do you need an adjustment for a Softail shock?
Makes it very easy to have the adjustment you need. These are not my words but is the most complete Softail shock adjustment I have read. Softails’s come from the factory with the lightest setting for the rear shocks (for <180lbs solo rider). However, they can handle well over 400lbs with no problems with a simple preload adjustment.
Where is the Softail shock on a Harley Davidson?
Softail Shock Adjustment. They function opposite of a conventional shock, as they are inverted. Positioned horizontally under the motorcycle, the shock is mounted to the frame in the front of the bike and to the swing arm in the rear. As the shock compresses, the bike gets taller. As the shock extends, the bike stands lower.
How do you adjust the shock on a Harley Davidson?
Make sure you turn the shock adjuster plates an equal number of turns for each shock. Tighten the jam nut on each shock absorber in a clockwise direction. Lower the motorcycle to the ground and remove the hydraulic jack stand from underneath the motorcycle. The shock absorber adjustment spanner wrench is available from your Harley Davidson dealer.
Is there a way to lower a Harley Softail?
Fits: 2018-2020 Harley FXLR/FLSL/FXBB Simple and easy way of lowering the rear of the bike without replacing the shock Made from stainless steel and billet aluminum Lowers bike up to… Lower your M8 Softail up to 1-3/8″ with this Lowering kit from Muller.