How do you install a Cayman radio in a car?
Connect the Orange/Brown wire (audio -) to the Brown wire of the subwoofer retention harness. Connect the Orange wire (Audio +) to the Red wire on the subwoofer retention harness. Remove the two Torx screws at the rear of each panel. Passenger side shown below. Pull each side cover towards the rear of the car.
Do you need to test circuits during Porsche installation?
There are times during the installation when you will need to test circuits and will need to temporarily reconnect the battery. Make sure that all Porsche items (seats, door panels, etc.) are connected before reconnecting the battery. Though air bag codes generally require a trip to the dealer to turn off, no damage occurs.
Do you need to reconnect the battery in a Porsche?
Make sure that all Porsche items (seats, door panels, etc.) are connected before reconnecting the battery. Though air bag codes generally require a trip to the dealer to turn off, no damage occurs. The body control modules in these vehicles are very smart.
Where is the parking brake on a Cayman?
There are two locations where Accessory, Illumination, & Parking Brake can be found. Location 1. Under the small panel below the hand brake. Location 2 (RECOMMENDED). Behind the center console structure (not inside the radio cavity). In most cars these connections are most easily made behind the center console structure ( location 2 ).
Where is the alarm on a Porsche Boxster?
The Boxster alarm system has a small contact switch located to the left side of the radio compartment that detects removal of the radio. In order to prevent the alarm from repeatedly going off, you need to connect this wire (brown / blue) to ground.
Connect the Orange/Brown wire (audio -) to the Brown wire of the subwoofer retention harness. Connect the Orange wire (Audio +) to the Red wire on the subwoofer retention harness. Remove the two Torx screws at the rear of each panel. Passenger side shown below. Pull each side cover towards the rear of the car.
Where to plug in a Porsche Boxster stereo head unit?
Plug the adapter into the back of the unit, and then you should be able to plug the antenna cable into the unit. With the new head unit wired up, reconnect the battery, and turn it on to test it. If all of the speakers, radio, and lights work, then install the radio bracket into the center dashboard.
There are times during the installation when you will need to test circuits and will need to temporarily reconnect the battery. Make sure that all Porsche items (seats, door panels, etc.) are connected before reconnecting the battery. Though air bag codes generally require a trip to the dealer to turn off, no damage occurs.