How do you get to the instrument cluster in a Honda Accord?
Pull the dashboard panel off the vehicle. This will give you access to the instrument cluster. Move the steering wheel as low as it can go so that you will have more room in which to work. Remove the three screws holding the instrument cluster to the Accord. Once those screws are removed, you can begin to pull the cluster toward you.
Where are the ignition keys on a Honda Accord?
Park the Accord and remove the keys from the ignition. Remove the two screws from the underside of the upper dashboard panel, directly above the instrument cluster. You will need a small Phillips screwdriver to access these screws. Pull the dashboard panel off the vehicle. This will give you access to the instrument cluster.
Where is the instrument cluster on a car?
You only need to remove the upper dashboard panel above the instrument cluster, which is held in by two screws. Once that is removed, the instrument cluster can be accessed if you wish to replace the dash light bulbs or the instrument cluster itself.
What’s the best way to move the instrument cluster?
Move the steering wheel as low as it can go so that you will have more room in which to work. Remove the three screws holding the instrument cluster to the Accord. Once those screws are removed, you can begin to pull the cluster toward you.
Where is the speedometer on a Honda Accord?
It is in the back of the engine compartment on top of the transmission. Remove the air intake hose and filter. Remove the electrical connector on top of the VSS by squeezing the clip and sliding it off of the sensor. Remove the VSS bolt with a 10 mm socket, ratchet, and extension. To remove the VSS, wiggle and pull it straight out.
How do you remove the speed sensor on a Honda Accord?
Remove the electrical connector on top of the VSS by squeezing the clip and sliding it off of the sensor. Remove the VSS bolt with a 10 mm socket, ratchet, and extension. To remove the VSS, wiggle and pull it straight out. The drive link, which is a small part that links the speed sensor to the transmission, should come out as well.
How can I get my Honda odometer to work?
Use a Phillips screwdriver to remove the screws of the dashboard bezels. There is one near the A/C controls and another above the gauge cluster itself. Undo several clips on both sides of the dashboard bezel, and remove it. Use a 1/4” ratchet, socket and extension to remove the wiring cluster from the dashboard.
How do you remove the VSS from a Honda Accord?
Remove the VSS bolt with a 10 mm socket, ratchet, and extension. To remove the VSS, wiggle and pull it straight out. The drive link, which is a small part that links the speed sensor to the transmission, should come out as well. If it doesn’t come out with the VSS, carefully remove it by hand. Insert the drive link into the new VSS and plug it in.