How do you fix central locking on a Saab?
It’s easy to fix. Just remove a few panels in the left footwell (non-UK/JP) above the clutch pedal and find the plastic box with a wiring harness plugged into it. It should be held up there by a metal clip that engages a peg holding it in place on a piece of sheet metal in there.
What does dead lock do on a Saab planet?
And if in addition you specify our advanced car alarm, you can be sure of one thing: your Saab will always be on its guard. Dead locking means the doors cannot be unlocked from inside, you can still unlock the doors using the key.
What to do if front windows on Saab wont open?
To open the case, it must be pushed a bit in direction to the front wheels and than opened as the white part of the picture in shows. Reset the pinch protection by removing and fitting fuse F5 from the instrument panel electrical centre (IPEC). The pinch protection for both door modules is now reset and both front windows can be programmed. 3.
Is there an ignition lock on a Saab 9-3?
Of course, There is no mechanical ignition lock to break (Saab 9-3) and the engine requires a unique rolling code from the electronic key to start. Furthermore, the electronic steering wheel lock will only open with the correct key code.
Why is my Saab 9-3 door lock not working?
The central locking door lock mechanisms on Saab 9-3s (and 9-5s) are known to occasionally malfunction/stop working. When you hit the central locking button on the remote, the affected door often won’t lock (or won’t unlock if it was already locked). The issue tends to start out intermittent and then worsen with time.
How do you remove a Saab door lock unit?
The electrical connector is a bit odd. First you need to unclip the black shroud from the cable and move it up and out. Then, the reddish/purple tab should be levered up, which will move the connector back until you can slide it off. You should now be able to remove the unit.
Where is the door card on a Saab 9-3?
To access the door locking mechanism, we need to remove the door card and disconnect some cabling etc. There are two screws holding the door card in place, both located under the inner handle. You need to carefully prise the handle apart to access them: The two screws have Torx heads, you’ll need a long driver to reach the middle one.