How do you check the transmission fluid on a Ford Mustang?
Find the transmission dipstick, which is usually brightly colored and toward the back of the engine. Remove the dipstick, being careful not to spill or drip any fluid. Wipe off the dipstick with a clean rag, just as you would do when checking the engine oil.
How do you check the transmission fluid on a 2003 Mustang v6?
Registered
- have the car at operating temperature (20 min drive)
- park it but keep it running.
- with your foot on the brake, move the shifter through each gear, pausing on each one for a few seconds, then bring it back up through the gears in the same manner.
- now check the fluid level.
Where is the transmission dipstick on a 2003 Mustang?
On a Mustang, the transmission dipstick is located on the passenger side of the engine, between the engine and the transmission. The top of the dipstick will be curled into a circle.
Where is the transmission dipstick on a Mustang?
Wipe away all dirt and debris from the top of the transmission dipstick, using a clean rag. Pull the transmission dipstick from its tube. On a Mustang, the transmission dipstick is located on the passenger side of the engine, between the engine and the transmission.
How do you add transmission fluid to a dipstick?
The top of the dipstick will be curled into a circle. Locate the transmission fluid level marks towards the tip of the dipstick. The fluid level should be above the “add” mark and just below the “full” mark. If required, add Ford automatic transmission fluid (Ford specification #ESW-M2C33-F / Type F) by pouring new fluid into the dipstick tube.
How to check the transmission fluid in a Mustang?
Apply the parking brake. Run the engine until it reaches normal operating temperature. Shift the gear selector lever through all of the gears while maintaining pressure on the brake pedal. Place the transmission in the “Park” position. Wipe away all dirt and debris from the top of the transmission dipstick, using a clean rag.